Accsoon CineView 2 SDI RX only Accsoon

Kód: AACC-WIT08-S-RXX

Značka: Accsoon

€306,27 €249 bez DPH

Vypredané

Položka bola vypredaná…

Detailné informácie

Popis
Diskusia

Podrobný popis

Accsoon CineView 2 SDI RX is a standalone wireless receiver for camera crews, directors and mobile monitoring. The link carries Full HD up to 60p and H.264 video over simultaneous 2.4 and 5 GHz bands, with system latency below 50 ms excluding the camera and range up to 450 m in unobstructed, interference-free line of sight. This standalone receiver adds SDI, HDMI and USB-C UVC outputs to a compatible CineView system. A compatible transmitter is required and purchased separately. One TX supports up to four wireless receiving devices in total. Each unit has a fanless aluminium body, 1.47″ full-colour LCD and NP-F, 7.4–16.8 V DC or USB-C 5 V / 3 A power options. RX provides HDMI, SDI and a separate USB-C UVC video output for a computer. Batteries, cables and monitoring equipment are purchased separately.

ACCSOON CINEVIEW 2 SDI · RX

Video at your monitor

This standalone receiver adds SDI, HDMI and USB-C UVC outputs to a compatible CineView system. A compatible transmitter is required and purchased separately.

Full HD 60p450 m<50 ms

Camera-side monitoring

The manufacturer app photograph shows the exact CineView 2 SDI camera-side transmitter and mobile monitoring. Connect the camera’s SDI or HDMI output to TX. Phones receive directly in Accsoon SEE, while a compatible hardware RX supplies a remote monitor. Camera, mobile device and monitors are not included. The transmitter shown is purchased separately for this RX-only package.

4K local, Full HD wireless

TX accepts SDI and HDMI and provides local HDMI loop-out. HDMI input and local loop support DCI/UHD 4K up to 60p, while wireless transmission and RX output remain Full HD up to 60p. TX accepts 3G-SDI level A/B; RX outputs SDI level A, HDMI and USB-C UVC. The diagram distinguishes the TX inputs on the left from RX outputs on the right. Only RX is included; TX is purchased separately.

Two bands together

CineView 2 SDI sends the picture simultaneously over 2.4 and 5 GHz. The receiver uses both data streams for a more resilient link. Two longer upper and two shorter side antennas are part of this generation’s new construction. Interference and obstacles remain possible; careful unit placement is still needed for reliable monitoring.

Room for camera movement

The manufacturer specifies range up to 450 m in line of sight without obstacles or interference. System latency is below 50 ms, excluding camera latency. Walls, radio traffic and receiver position can reduce practical range. The illustration shows the rated range rather than a guaranteed link in every environment.

One source, four devices

One TX supports up to four wireless receiving devices in total: compatible RX units or phones/tablets with Accsoon SEE. The five diagram rows are alternative combinations, not five simultaneous links. A wired monitor after RX or TX’s local HDMI monitor does not consume another wireless slot. This receiver uses one slot of a separately purchased transmitter.

Extend your CineView system

The manufacturer specifies compatibility with CineView SE, HE and Quad. CineView 2 SDI TX can also feed a CineView M7 Pro monitor in RX mode. The diagram illustrates possible transmitter/receiver pairings, not the contents of the package. Check TX/RX roles and a mutually supported video format.

Three power options

Each unit accepts an NP-F550/750/970 battery, 7.4–16.8 V DC or its separate USB-C power input at 5 V / 3 A according to manual v2.0. The 5.5 × 2.1 mm DC socket is centre positive. TX draws below 6 W and RX below 5 W. The illustrated V-Mount option requires a separate adapter; batteries, supplies and cables are purchased separately.

Link status on the display

The 1.47″ full-colour LCD shows the numbered diagram’s 1 signal strength, 2 connected-device count, 3 battery level, 4 group, 5 channel, 6 video format and 7 audio. Set matching groups on TX and RX and restart after changing them. At startup, TX in AUTO (A) selects a suitable channel; RX follows the transmitter.

Choose a transmission mode

The device menu offers HQ, NOR and SPD. HQ prioritises picture quality, NOR balances performance and SPD prioritises speed. Adjust the mode to the environment and monitoring needs. Follow the manual for mobile-app live streaming; the illustration shows the actual device interface.

Video directly to a computer

RX provides a separate USB-C UVC video output for a computer. The manufacturer photograph shows the exact receiver connected to a laptop for monitoring and streaming software. This is a different socket from USB-C power. RX also supplies HDMI and SDI outputs simultaneously; prepare Internet access, a computer and a USB data cable separately.

Monitor and stream in Accsoon SEE

An iOS or Android phone or tablet receives directly from TX in Accsoon SEE and occupies one wireless slot. The app includes waveform, zebra, false colour, focus tools, LUT preview, recording and overlays. The interface example shows RTMP destination and key entry; streaming requires the mobile device’s own Internet connection and a suitable NOR/SPD setting according to the manual.

Quiet, compact construction

The fanless aluminium housing adds no fan noise. Each unit measures 60 × 27.5 × 106.5 mm and weighs 210 g without antennas. A 1/4″-20 thread with anti-rotation support helps mounting on a camera rig or stand. Operating temperature is −10 to 40 °C; the manufacturer detail illustrates passive cooling construction.