Accsoon Cineview HE -WIT04-HE Accsoon

Monitor away from the camera

Connect the transmitter to the camera over HDMI and the receiver to an external monitor. A director, client or solo camera operator can check framing away from the camera body without a long video cable between positions. The manufacturer photograph shows CineView HE in an actual outdoor production; the camera and monitor are not included.

Two bands for one picture

CineView HE transmits the picture simultaneously over 2.4 and 5 GHz. The receiver compares both data streams and combines them into the output picture, helping reduce the impact of interference. Diagram: 1 and 2 show losses on each band, 3 their combination in RX and 4 the recovered picture. Performance still depends on the surrounding radio environment.

Range up to 350 metres

The manufacturer specifies a range up to 350 m with line of sight, no obstructions and no interference. Wireless transmission latency is below 60 ms and excludes camera latency. This combination supports on-set monitoring; reception distance on a phone can differ from that of a hardware receiver.

HDMI at the camera, HDMI and UVC at RX

TX provides full-size HDMI input and local HDMI loop-out for an on-camera monitor. This wired output does not add wireless transmission latency. RX provides HDMI output and a separate USB-C UVC data output. The system carries Full HD up to 60p and PCM audio; it does not accept 4K or SDI.

Up to four receiving devices

One TX supports a maximum of four receiving devices in total. Mix hardware receivers with phones or tablets using Accsoon SEE for iOS and Android: for example 1 RX + 3 mobile devices, or 4 RX. A wired monitor connected to RX does not consume another wireless slot. This kit includes 1 TX and 1 RX; additional receivers and mobile devices are purchased separately.

Video to a computer without a capture card

1 · UVC: connect RX to a computer with a USB-C data cable and use the picture in software such as OBS. A separate capture card is unnecessary. 2 · RTMP: live streaming through Accsoon SEE uses a phone or tablet and its Internet connection. HE does not send RTMP directly to the Internet by itself. Destination support depends on the app and the platform’s current terms; cables and computer are not included.

Accsoon SEE monitoring tools

Mobile reception adds exposure, colour, framing and focus tools, recording and live streaming in Accsoon SEE. The numbered legend follows the manufacturer’s icons. The interface screenshot illustrates the app; CineView HE transmission remains Full HD.

1. Monochrome preview
2. Histogram
3. LUT
4. Mirror
5. Zebra
6. False colour
7. Overlay
8. Waveform
9. Vectorscope
10. Audio
11. Markers
12. Focus
13. RGB
14. Screenshots
15. Grids
16. Display correction

Power to suit your rig

Power each unit from an NP-F550/750/970 battery, 7.4–16.8 V DC or a 5 V USB-C source rated at least 2 A. The DC connector is 5.5 × 2.1 mm, centre positive. RX has separate USB-C connections for UVC data output and power. Batteries, supplies and power cables are purchased separately; this USB-C input does not charge an NP-F battery.

A kit for a camera and one monitor

The standard 1TX + 1RX package includes a transmitter, receiver, nine antennas, two cold shoe mount adapters and a manual. Eight antennas fit both units, with the ninth as a spare. Choose HDMI cables, power and any USB-C data cable for your setup. This diagram does not describe TX-only, RX-only or 1T4R packages.