Blackmagic Design 2110 IP SDI to HDMI 12G Blackmagic Design
Kód: ACONVNVIPM/12G/HDMI02XPodrobný popis
Blackmagic 2110 IP SDI to HDMI 12G converts 12G-SDI or SMPTE ST 2110 video to HDMI for colour-accurate rack-based monitoring. It includes 3D LUTs for HDMI-display calibration, a front LCD with preview and audio meters, two balanced XLR outputs, speaker and headphone output. It supports SD, HD and Ultra HD up to 2160p60.
SMPTE ST 2110 / 12G-SDI → HDMI
Reference HDMI monitoring for IP and SDI workflows
This rack converter feeds a single HDMI display from 12G-SDI or SMPTE ST 2110. It combines 3D LUTs, a front LCD with preview and meters, speaker and headphone output for direct video and audio confidence monitoring.
One path to accurate viewing
The converter accepts 12G-SDI or SMPTE ST 2110 over 10G BASE-T and outputs HDMI 2.0. An SDI loop output retains the signal for downstream equipment. Two professional balanced XLR outputs with variable gain and adjustable delay, plus a 6.35 mm headphone jack, support audio monitoring.
It supports SD, HD and Ultra HD standards up to 2160p60. USB-C provides webcam output up to 1080p60, configuration and updates.
Part of a managed IP facility
SMPTE ST 2110 carries video, up to 16 channels of embedded audio and ancillary data over 10G Ethernet. PTP provides synchronisation while NMOS assists discovery and connection management in a controlled broadcast network.
3D LUTs allow HDMI-display calibration for colour-critical grading, control-room or edit-suite monitoring without a separate LUT processor.
Details for daily monitoring
The original product copy correctly highlights use with current OLED televisions for accurate colour monitoring in grading and edit suites. The pair of analogue XLR outputs can feed powered speakers; remote level control, variable gain and delay help keep audio and video in sync.
The front LCD provides video preview, audio levels and menus. A built-in speaker and headphone output enable quick local checking. Multirate 12G-SDI covers SD, HD and Ultra HD standards, including 2160p60, over one BNC cable.
The converter is designed to bring SDI equipment into SMPTE ST 2110 systems. PTP and NMOS support timing and managed source connections through video-router control.
- Blackmagic 2110 IP SDI to HDMI 12G
- Welcome wallet with QR code for software download
- SDI input: 1×; SD, 1.5G, 3G, 6G and 12G-SDI
- SDI loop output: 1×
- HDMI output: 1× HDMI 2.0
- IP interface: 1× 10G Ethernet, 10/100/1000/10G BASE-T
- IP audio: 16 channels embedded input and output over SMPTE ST 2110
- SDI / HDMI audio: 16 channels on SDI, 8 channels on HDMI
- Analogue monitoring: 2× balanced 3-pin XLR with variable gain and delay
- Headphones: 1× 6.35 mm connector
- Display and LUT: front LCD with preview, meters and menus; 3D LUTs
- USB-C: webcam up to 1080p60, configuration and firmware
- Formats: SD, HD and Ultra HD up to 2160p60
- Installation: one-third rack width, 1U height
- Operating temperature: 0 to 40 °C
- Warranty: 1 year limited manufacturer’s warranty
Dodatočné parametre
| Kategória: | Blackmagic ATEM |
|---|---|
| Záruka: | 2 roky |
| EAN: | 9338716010015 |
Diskusia
Buďte prvý, kto napíše príspevok k tejto položke.
Len registrovaní používatelia môžu pridávať príspevky. Prosím prihláste sa alebo sa zaregistrujte.
