Blackmagic Design ATEM Microphone Converter Blackmagic Design

Podrobný popis

ATEM Microphone Converter adds four studio microphone or line inputs to the MADI port of ATEM Television Studio switchers. It offers combination XLR/TRS connectors, 48V phantom power, eight ADCs on each input for 131 dB(A) of dynamic range and an HDMI output with scrolling waveforms.

Four more microphones via MADI

The converter plugs into the MADI port of an ATEM Television Studio switcher with no complex setup, and additional units can be daisy chained for more inputs.

4× XLR/TRS64-channel MADI131 dB(A)HDMI monitoring

Gain set in the switcher

The converter has no analog preamplifier: the input is converted directly to 32-bit RAW data and gain is applied digitally in ±0.1 dB steps – without the clicks and noise of an analog gain stage.

−129 dBV noise floor

With no analog gain stage the noise floor stays equally low whatever gain you set in the switcher.

131 dB(A) dynamic range

Eight ADCs on each input work together, giving 131 dB(A) of range and just 0.002 % distortion.

Matched inputs

The eight-ADC-per-input design gives all channels very similar specifications and a stable noise floor – a microphone sounds the same on any input and even on another unit.

Digital preamplifier

A stable digital preamplifier working at the full 32-bit depth matches the level of each microphone, and the final levels are set on the audio mixer of the ATEM switcher.

Combination XLR/TRS inputs

Each of the four inputs takes an XLR or a jack cable. Mini switches select microphone or line level and turn on 48V phantom power for condenser microphones.

For microphones or an external mixer

The converter adds studio microphones or the output of an external audio mixer to the switcher. Connection is plug and play, with no complex setup.

Monitoring on HDMI

On a television or monitor the converter draws channel waveforms over the last 60 seconds, level meters, channel names and the state of the mic/line and phantom power switches. When daisy chained it shows more channels.

Connections

The left side has four combination inputs for microphone or line; the right side has the HDMI monitor output, MADI output and input, USB, Ethernet and the 12V power input.

• ATEM Microphone Converter
• External 12V DC power supply with locking connector and international socket adapters
• Welcome wallet with QR code for software download

• Analog audio inputs: 4× combination 3-pin XLR and 1/4 inch TRS jack, switchable between +24 dB line and mic level, with +48 V phantom power
• MADI input: 1× BNC supports 64 channel MADI digital audio
• MADI output: 1× BNC supports 64 channel MADI digital audio
• HDMI video output: 1× monitor out
• Computer interface: 1× USB-C with locking screw
• Ethernet: 10/100/1000BASE-T
• HDMI output standards: 1080p24, 1080p25, 1080p30, 1080p48, 1080p50, 1080p60
• HDMI monitoring: Displays the converter name and 4, 8, 12 or 16 audio channels with 60 second waveform history; channel names, VU meters, mic/line level setting and phantom power status
• ADCs per input: 8
• Digital preamp: 32-bit
• Dynamic range: 131 dB(A)
• Noise floor: −129 dBV
• Total harmonic distortion at full scale: 0.002 %
• Output sample depth: 24-bit
• Output sampling rate: 48 kHz
• MADI compliance: AES10-2020
• Software updates: Mac and Windows software upgrade via USB or Ethernet, via downloadable utility application
• Operating systems: Mac 13.0 Ventura, Mac 14.0 Sonoma or later; Windows 10 and 11
• Settings control: USB and Ethernet via free software utility
• Hardware switches: Mini switches for selecting mic or line level and setting +48 V phantom power on/off
• Power: 1× external 12V power supply with locking connector
• Power consumption: 12 W max.
• Operational voltage range: 12–17.5 V DC
• Operating temperature: 0 to 40 °C (32 to 104 °F)
• Storage temperature: −20 to 60 °C (−4 to 140 °F)
• Relative humidity: 0–90 % non-condensing
• Warranty: 1 year limited manufacturer's warranty