Blackmagic Design ATEM Monitoring Rack Panel 40 Blackmagic Design

Podrobný popis

A rack-mount control panel for local control of ATEM Constellation IP switchers with a built-in monitoring converter. It offers 40 input buttons, redundant 10G SMPTE-2110, two 12G-SDI outputs, HDMI, a 5-inch LCD monitor and a front panel talkback connection in a 2 RU design.

40 buttons, monitoring and IP conversion in one panel

ATEM Monitoring Rack Panel 40 adds convenient local control and monitoring right in the rack to ATEM Constellation IP switchers. Buttons, LCD and talkback are instantly at hand on the front panel.

40 buttons2 RU rack2× 10G IP2× 12G-SDI

A 2110 converter inside a control panel

Inside the panel is a video converter: it converts two redundant 10G SMPTE 2110 networks to two 12G-SDI outputs and an HDMI output, and the built-in 5-inch LCD shows the picture too.

ST 2022-7 redundancy

A pair of 10G RJ45 ports receives IP streams from two 2110 networks to ST 2022-7, so losing one network does not interrupt the picture.

Separate control network

A 1G RJ45 port connects the panel to the switcher and NMOS control separately from video.

Talkback on the front panel

A 5-pin XLR headset connector plus talkback and program mix buttons allow communication right from the rack.

Dual power

Two internal 100–240 V AC power supplies with two IEC C14 inputs keep the panel running even if one feed fails.

Switcher control from the rack

40 input buttons, CUT and AUTO buttons, transition buttons and a rotary knob with menu: the local ATEM switcher can be cut and set up without the main control panel – during setup or in an emergency.

2110 to SDI and HDMI conversion

One incoming IP video stream is converted to two 12G-SDI outputs and an HDMI 4K output with embedded audio – 16 channels on SDI, 8 on HDMI. The Blackmagic IP10 codec optionally handles 2160p59.94 and 2160p60.

Monitoring right in the rack

The built-in 5-inch LCD shows video and signal status, so the engineer sees the result right at the rack. Mount the panel in the rack and use it when setting up or monitoring a job.

Connections

The front panel has input, transition, talkback and menu buttons, the talkback connector and the LCD; the rear has two AC power inputs, USB-C, the 1G control port, two 10G ports for 2110 IP video, two 12G-SDI outputs and an HDMI 4K output.

• ATEM Monitoring Rack Panel 40
• Welcome wallet with QR code for software download

• 10G 2110 IP networks: 2× 10G RJ45 connections; supports ST 2022-7 redundant delivery of IP streams over two 2110 networks
• 1G control network: 1× 1G RJ45 for connection to switcher and NMOS control
• Total video inputs: 1
• Total video outputs: 3
• SDI video outputs: 2
• SDI rates: 1.5G, 3G, 6G, 12G
• HDMI 2.0 video outputs: 1
• SMPTE ST 2110 IP audio inputs: 16 ch embedded audio on each 2110 IP video stream over 10G Ethernet
• SDI audio outputs: 16 ch embedded audio on all SDI outputs
• HDMI audio outputs: 8 ch embedded audio on HDMI output
• Talkback audio: 1× 5-pin XLR talkback
• Computer interface: 1× USB-C for setup utility and software updates
• Power input: 2× IEC C14
• HD format support: 720p50, 720p59.94, 720p60, 1080i50, 1080i59.94, 1080i60, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
• Ultra HD format support: 2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p30, 2160p50, 2160p59.94, 2160p60
• SMPTE compliance: SMPTE 2110-20, SMPTE 2110-21, SMPTE 2110-30, SMPTE 2110-40, SMPTE 2022-7
• Video sampling: 4:2:2
• Color precision: 10-bit
• SDI color space: Rec. 709, Rec. 2020
• IP video compliance: SMPTE 2110-20 (uncompressed video), IGMP v3; SMPTE 2110-21 (traffic shaping) – sender Narrow, receiver Narrow, Wide Synchronous, Asynchronous; SMPTE 2110-30 (PCM), audio conformance Level C; SMPTE 2110-40 (ancillary data) – full access to the entire SMPTE ancillary data stream, including RP 188/SMPTE 12M-2, closed captioning and HDR static metadata
• Codec: Blackmagic IP10 codec optional for 2160p59.94 and 2160p60 as 2110 IP video
• Precision Time Protocol: IEEE 1588-2008 (PTP v2), ST 2059-1, ST 2059-2
• NMOS: IS-04 Discovery and Registration v1.3.2 (peer-to-peer via mDNS/DNS-SD), IS-05 Connection Management v1.1.2, BCP-002-01 Natural Grouping, BCP-004-01 Receiver Capabilities
• Talkback support: Yes
• Control: Front panel emergency switching, software or optional hardware panel
• Front panel: Built in HD LCD monitor for video, 42 LED buttons for setup and emergency switching, 40 source buttons, 4 transition buttons, 6 talkback selection and mix buttons, menu control knob and set button, front panel lock button
• Display: Built-in 5-inch LCD screen
• Control panel included: ATEM Software Control Panel included free for macOS 14.0 Sonoma, macOS 15.0 Sequoia or later and Windows 10 and 11
• Software updates: Using USB or Ethernet connection directly connected to Mac or Windows computers; includes ATEM Setup Utility
• Configuration: Set via ATEM Software Control Panel, excluding ATEM chassis IP address which is set via the ATEM Setup Utility connected via USB-C to chassis
• Operating systems: Mac 15.0 Sequoia, Mac 26.0 Tahoe or later; Windows 10 and 11, Windows 11 for ARM
• Power: 2× 100–240 V AC 50/60 Hz internal power supplies
• Physical installation: 2 rack units
• Operating temperature: 0 to 40 °C (32 to 104 °F)
• Storage temperature: −20 to 60 °C (−4 to 140 °F)
• Relative humidity: 0–90 % non-condensing
• Warranty: 1 year limited manufacturer's warranty