Blackmagic Design Pocket Camera DC Cable Pack Blackmagic Design
Kód: ACABLE-CCPOC4K/DCXPodrobný popis
The Blackmagic Pocket Camera DC Cable Pack lets you power Pocket Cinema Camera 4K and 6K cameras from a variety of DC power sources. It contains a D-Tap to 2-pin cable, a 2.5 mm barrel to 2-pin cable and a 2-pin to fly lead cable from which you can make your own cable with any connector. All cables are 65 cm long.
Power the camera from different sources
Three cables with a 2-pin connector for the camera’s power input: connect the Pocket Cinema Camera to a battery with a D-Tap output, to a supply with a 2.5 mm connector, or to your own connector.
Power independent of the camera battery
Long shoots on a rig or at a fixed position need not depend on a single battery: the cables connect the camera directly to an external power source.
D-Tap to 2-pin cable
Connects the camera to batteries and power supplies with a D-Tap output. The cable is 65 cm long.
DC 2.5 mm to 2-pin cable
For power supplies and external batteries with a 2.5 mm round DC connector. The cable is 65 cm long.
2-pin to fly lead cable
A 2-pin camera connector on one end and bare wires on the other. It is suited to making your own cable with any connector; the cable is 65 cm long.
- 1× D-Tap to 2-pin cable, 65 cm
- 1× DC 2.5 mm to 2-pin cable, 65 cm
- 1× 2-pin to fly lead cable, 65 cm
- Type: power cables (set of 3)
- Connectors: D-Tap, 2.5 mm round DC connector, 2-pin, fly lead
- Cable length: 65 cm
- Designed for: Pocket Cinema Camera 4K and 6K cameras
Dodatočné parametre
| Kategória: | Napájacie káble a adaptéry |
|---|---|
| Záruka: | 2 roky |
| EAN: | 9338716005844 |
Diskusia
Buďte prvý, kto napíše príspevok k tejto položke.
Len registrovaní používatelia môžu pridávať príspevky. Prosím prihláste sa alebo sa zaregistrujte.
