Blackmagic Design PYXIS Monitor Kit Blackmagic Design

Podrobný popis

Blackmagic PYXIS Monitor Kit contains the 5″ HDR touchscreen monitor with full camera control for Blackmagic PYXIS and URSA Cine cameras, a sunshade, a USB-C cable with locking screws and the PYXIS mounts – swivel mount, fixed mount and dovetail shoe that let you attach and remove the monitor without tools. 1500 nits of brightness keep it readable even in sunlight.

Monitor with mounts and cable for PYXIS

A complete kit: monitor, sunshade, USB-C cable and mounts that let you attach and remove the monitor without tools.

5″ Full HD 1920 × 1080HDR · 1500 nitsTouchscreen camera controlUSB-C: video, power, controlTally · F1–F3With mounts and USB-C cable

Full camera control over one cable

The monitor provides the same controls and overlays as the built in screen of PYXIS and carries video, power and control over a single USB-C cable.

Assist station

The monitor also works off camera – an assistant can watch framing and focus from any position on set, for example when the camera is on a gimbal.

For one person crews

The rear tally shows that the camera is recording, so you can stand in front of the camera and operate it at the same time.

Touchscreen camera control

Tap the screen to set frame rate, shutter, iris, ISO, white balance, tint, timecode, media, audio, focus zoom, digital slate and camera menus, and to start recording. Three assignable F1–F3 buttons recall presets or toggle zebra, focus assist, false color, grid or LUT.

When the rig covers the built in screen

Cages, rods and other accessories can block the built in 4″ screen of PYXIS. The 5″ monitor can then be mounted wherever you need it – on the camera, on the rig or off camera on a gimbal – with full control. The accelerometer rotates the image when the monitor is mounted upside down.

1500 nits and a sunshade

The HDR monitor with 1500 nits of brightness stays readable even in direct sunlight. The clip on sunshade has fold out sides and folds up to protect the monitor in transport.

PYXIS mounts with dovetail

The dovetail shoe screws onto the camera, the swivel mount holds the monitor, and thanks to the dovetail the monitor attaches and detaches in seconds, without loosening bolts with tools. The swivel mount also attaches directly to the Blackmagic URSA Cine Handle; the fixed mount attaches the monitor to the rotating bracket of the URSA Cine EVF viewfinder.

• Blackmagic PYXIS Monitor
• Clip on sunshade (Blackmagic PYXIS Clip On Sunshade)
• Swivel mount (Blackmagic PYXIS Monitor Swivel Mount)
• Fixed mount with screws (Blackmagic PYXIS Monitor Fixed Mount)
• Dovetail shoe with screws (Blackmagic PYXIS Monitor Dovetail Shoe)
• 1× USB-C viewfinder cable
• Welcome wallet with QR code for software download
• Blackmagic Design sticker

• Display: 5″ LCD capacitive touchscreen, HDR
• Resolution: 1920 × 1080 (Full HD)
• Brightness: 1500 nits
• Frame rates: up to 60 fps
• Connection: USB-C with locking connector – video, power, data and software updates
• Tally: rear facing LED tally light
• Accelerometer: automatically rotates the image when the monitor is mounted upside down
• Control: touchscreen camera control and assignable F1, F2, F3 buttons
• Mounting points: bottom 1× 1/4-20 with ARRI locating pin pattern and 2× M4, side 1× 1/4-20 with ARRI locating pin pattern and 2× M4
• Compatible cameras: Blackmagic PYXIS 6K, PYXIS 6K PL, PYXIS 6K EF, URSA Cine 12K LF, URSA Cine 17K 65, Micro Studio Camera 4K G2
• Software: Mac 13 Ventura, Mac 14 Sonoma or later, Windows 10 and 11
• Operating temperature: 0 to 40 °C
• Storage temperature: −20 to 60 °C
• Relative humidity: 0 to 90 % non-condensing
• Mounts included: swivel mount, fixed mount, dovetail shoe
• Warranty: 1 year limited manufacturer’s warranty