Blackmagic Design Studio Converter Blackmagic Design
Kód: ACINSTUDMFT/H/SCXPodrobný popis
Blackmagic Design Studio Converter is a converter for Blackmagic studio cameras with a 10G Ethernet connection (Studio Camera 4K Pro, 4K Pro G2 and 6K Pro). Over a single low cost Cat 6A cable it carries the camera video, program return, timecode, reference, tally, talkback, camera control and PoE power, similar to an expensive SMPTE fiber setup. At the control room end it has 2 12G-SDI outputs, 2 SDI return inputs, a 3G-SDI monitor output, timecode and Tri-Sync or Black Burst reference, talkback, a 2.2″ LCD screen, a headphone output and a speaker.
The whole camera link on one cable
Video, return feeds, tally, talkback, control and camera power all travel down a single 10G Ethernet copper cable.
Like SMPTE fiber, only cheaper
The converter powers the camera over the Ethernet cable, so you need no power supply at the camera. At the control room end it breaks out all video, audio and talkback signals to standard connectors.
Camera far from the switcher
The camera needs no power supply of its own, so it can be placed far away from the switcher. A Cat 6 cable is enough for shorter runs, for longer runs a well shielded Cat 6A S/FTP cable is a good choice. The Ethernet connector locks into both units.
At the control room end
Send one 12G-SDI camera output to the switcher and the other, for example, to a HyperDeck Studio recorder for a clean ISO recording. Return input 1 carries program from the switcher to the camera viewfinder, input 2 another signal – a teleprompter, graphics or another camera – to the camera’s HDMI output.
Sync and talkback
The BNC reference and timecode connectors have a loop output, so several converters in a rack can share one sync source. Talkback arrives on SDI channels 13 to 16 (13 and 14 engineering, 15 and 16 production), analog systems such as ClearCom or RTS connect via an RJ-45 connector. The CALL button alerts the camera operator or presenter by flashing the camera tally.
Connectors and controls
The front panel is used for monitoring and operation, the rear panel connects to the camera and to the control room equipment.
- Blackmagic Studio Converter 10G Ethernet converter
- Camera connection: 1× RJ-45 10G Ethernet with 90 W PoE, Cat 6A cable
- Camera outputs: 2× 12G-SDI
- Return inputs: 2× SDI (Return 1, Return 2)
- Monitor output: 1× 3G-SDI with graphic overlays
- SDI rates: 1.5G, 3G, 6G, 12G
- HD formats: 1080p23.98 to 1080p60, 1080i50 / 59.94 / 60
- Ultra HD formats: 2160p23.98 to 2160p60
- SDI audio: 2 program channels, talkback on channels 13 to 16
- Analog input: 2 channels of program audio and tally, 9-pin connector
- Talkback: channels 13 and 14 engineering, 15 and 16 production, RJ-45 for analog systems
- Timecode: 1× BNC in, 1× BNC out
- Reference: 1× BNC in, 1× BNC out, Tri-Sync or Black Burst
- Screen and controls: 2.2″ color LCD, 7 buttons, search dial
- Audio monitoring: 6.35 mm headphone output, built-in mono speaker
- Network and computer: 1× 1 Gb/s Ethernet, 1× USB-C for updates
- Color space: Rec. 709, Rec. 2020, 4:2:2, 10-bit
- Power: internal 100–240 V AC power supply, 50/60 Hz
- Power consumption: 40 W max plus camera power
- Operating temperature: 0 to 40 °C
- Storage temperature: −20 to 45 °C
- Humidity: 0 to 90 %, non-condensing
Dodatočné parametre
| Kategória: | Vysielacie a routovacie zariadenia |
|---|---|
| Záruka: | 2 roky |
| EAN: | 9338716007657 |
Diskusia
Buďte prvý, kto napíše príspevok k tejto položke.
Len registrovaní používatelia môžu pridávať príspevky. Prosím prihláste sa alebo sa zaregistrujte.
