Blackmagic Design Teranex Mini SDI to HDMI 8K HDR Blackmagic Design

Kód: ACONVN8TRM/AA/SDIHX

Syntex Blackmagic Design Teranex Mini SDI to HDMI 8K HDR MAIN 01

Syntex Blackmagic Design Teranex Mini SDI to HDMI 8K HDR MAIN 02

Syntex Blackmagic Design Teranex Mini SDI to HDMI 8K HDR MAIN 03

€1 624,83 €1 321 bez DPH

Môžeme doručiť do: 14.8.2026

Detailné informácie

Popis
Diskusia

Podrobný popis

Professional converter and monitoring processor for Quad Link 12G‑SDI to HDMI 8K up to 60p. Features HDR PQ/HLG, two on‑screen scopes, 33‑point 3D LUTs, automatic display calibration and 8K down conversion to Ultra HD or HD.

Professional 8K HDR monitoring

Quad Link 12G‑SDI to HDMI 8K without compromise

Teranex Mini SDI to HDMI 8K HDR converts professional SDI signals for accurate monitoring on HDMI televisions and projectors. It adds two independent on‑screen scopes, 33‑point 3D LUTs and automatic display calibration.

up to 4320p60HDR PQ and HLG4× 12G‑SDI input4× HDMI 2.0

Blackmagic Design Teranex Mini SDI to HDMI 8K HDR perspective view

8K up to 60pDual Link or Quad Link 12G‑SDI with automatic switching between HD, Ultra HD, 4K and 8K formats.

Two scopesWaveform, RGB/YUV parade, vectorscope or histogram can be overlaid directly on the picture.

33‑point 3D LUTsTwo independent 10‑bit RGB LUTs for preview, correction and accurate display matching.

Display calibrationSupports compatible USB probes and automatic generation of a corrective 3D LUT.

Front-panel confidence

Picture, audio meters and settings on a 2.2″ LCD

The colour display shows the input picture, format and accurate audio meters. Six buttons and a spin knob provide direct access to LUTs, calibration, scopes, networking and audio without opening the desktop utility.

VU / PPMselectable audio meter ballistics

HDMI Instant Lockfast picture recovery after a signal change

Front panel of Teranex Mini SDI to HDMI 8K HDR

Rear connections of Teranex Mini SDI to HDMI 8K HDR

Ready for studio and cinema

Four SDI inputs, loop outputs and four HDMI ports

Four BNC inputs accept Quad Link 12G‑SDI for 8K and each has its own loop output. Four HDMI 2.0 connectors operate as a single output for HD, Ultra HD and 4K or as a group of four for 8K up to 60p.

Built‑in 2SI to Square Division conversion and down conversion also let you monitor an 8K source on an Ultra HD or HD display.

Accurate HDR workflow

From signal to colour‑accurate picture

HDR metadataSupports PQ and HLG, Rec.709, Rec.2020 and the full DCI‑P3 colour space.

Flexible configurationConfigure from the front panel, via USB‑C or over Ethernet with Teranex Utility.

Desktop or rackRubber feet support desktop use; the compatible Universal Rack Shelf is available for rack installation.

1× Blackmagic Design Teranex Mini SDI to HDMI 8K HDR
Welcome wallet with QR code to download software
An IEC power cable is not listed by the manufacturer as part of the standard package

SDI inputs

4× 12G‑SDI BNC, automatic switching between HD / 2K / 4K / 8K

SDI loop outputs

4× 12G‑SDI BNC

HDMI outputs

4× HDMI 2.0 type A; 1× for HD / UHD / 4K or 4× for 8K 4320p up to 60p

Analogue audio output

2 channels via RCA

Embedded audio

16 channels SDI, 8 channels HDMI

SDI formats

1.5G / 3G / 6G / 12G‑SDI; Dual Link and Quad Link 2SI, Quad Link Square Division

HDR and colour spaces

PQ, HLG, Rec.709, Rec.2020 and DCI‑P3

Scopes

2 independent on‑screen scopes; waveform, RGB/YUV parade, vectorscope, histogram

LUTs

2× 33‑point 10‑bit RGB 3D LUT; automatic calibration with compatible USB probe

Controls

2.2″ colour LCD, 6 buttons, spin knob; USB‑C and Ethernet

Power

Built‑in 100–240 V AC, 50/60 Hz power supply; IEC C14 connector; 25 W consumption

Operating temperature

0 to 40 °C

Storage temperature

−20 to 60 °C

Relative humidity

0–90%, non‑condensing

Dodatočné parametre

Kategória:	Blackmagic ATEM
Záruka:	2 roky
EAN:	9338716006179

Diskusia

Buďte prvý, kto napíše príspevok k tejto položke.

Len registrovaní používatelia môžu pridávať príspevky. Prosím prihláste sa alebo sa zaregistrujte.