Exascend Nitro Pro CFexpress 4.0 Type B 1TB Exascend

Podrobný popis

The flagship Nitro Pro CFexpress 4.0 Type B card reads at up to 3,750 MB/s and sustains a 3,300 MB/s write — enough for 12K RAW at up to 120 fps. 3D TLC in pSLC mode gives 6 000 TB of write endurance, and the IP67 aluminium body shrugs off water, dust and −30 to 85 °C. VPG 400 certified, 1 TB capacity, compatible with any CFexpress Type B slot. Limited lifetime warranty with data recovery.

Flagship CFexpress 4.0 Type B: 3,750 MB/s, pSLC, IP67

Nitro Pro combines the highest speed in the range (a sustained 3,300 MB/s write), pSLC-mode memory with 6 000 TB endurance and an IP67 aluminium body rated for −30 to 85 °C. VPG 400 certified, limited lifetime warranty.

VPG 4003,750 / 3,400 MB/s1 TB6 000 TB TBWIP67

A sustained 3,300 MB/s write

PCIe Gen4 ×2 and 3D TLC in pSLC mode hold a sustained 3,500 MB/s read and 3,300 MB/s write — with no drop-off even as the card fills up. VPG 400 certification guarantees at least 400 MB/s for 8K and 12K RAW at up to 120 fps without dropped frames.

Into any CFexpress Type B slot

The card is compatible with the Canon EOS R5, R5 Mark II, R5 C, R3, R1 and C500, Nikon Z6 II, Z8 and Z9, Atomos Ninja TX recorders and the Blackmagic PYXIS 12K and URSA Cine 12K cameras. In a CFexpress 2.0 body it runs at the slot’s speed; the full 3,750 MB/s comes into play when offloading through the Nitro CFexpress 4.0 reader over USB4.

Aluminium, IP67 and −30 to 85 °C

The full-body aluminium casing dissipates heat and, together with Adaptive Thermal Control™, keeps the card up to 20 °C cooler than standard models, so performance does not waver on long recordings. IP67 means dust-tight and protected against immersion to 1 m; the −30 to 85 °C operating range goes beyond the usual standard.

6 000 TB of write endurance

pSLC mode stores a single bit per cell, multiplying endurance compared with ordinary TLC — 6 000 TB TBW on the 1 TB version, an MTBF of 2,000,000 hours. At a sustained 400 MB/s write the card draws only ≈1.25 W and spares the camera battery.

PCIe Gen4 ×2

Two PCIe 4.0 lanes — the full bandwidth of CFexpress 4.0 Type B, backward compatible with 2.0 slots.

Data Retention Plus™ and RAID ECC

Stored data is refreshed continuously and RAID ECC can rebuild even severely corrupted footage.

Data recovery and lifetime warranty

A limited lifetime warranty and factory data recovery if footage is deleted by mistake or the card gets formatted.

512 GB or 1 TB

The Nitro Pro Type B series comes in two capacities; this is the 1 TB version with 6 000 TB endurance.

Introducing the flagship Nitro Pro CFexpress 4.0 Type B Card, available in 512 GB and 1 TB. Designed to exceed the demands of professional creators, it sets new standards in speed, efficiency, and durability. Engineered for challenging environments, it ensures uncompromising performance for capturing critical moments with ease.

Waterproof

Dust-resistant

Weatherproof

Impact-resistant

X-ray-safe

Magnetic-resistant

• 1× Exascend Nitro Pro CFexpress 4.0 Type B 1 TB memory card

• Card type: CFexpress 4.0 Type B
• Capacity: 1 TB
• Interface: PCIe Gen4 ×2
• Memory type: 3D TLC NAND in pSLC mode
• Certification: VPG 400 (min. 400 MB/s write)
• Max. sequential read: 3,750 MB/s
• Max. sequential write: 3,400 MB/s
• Sustained read: 3,500 MB/s
• Sustained write: 3,300 MB/s
• Power draw: ≈1.25 W at a sustained 400 MB/s write
• Input voltage: 3.3 V ±5 %
• Ingress protection: IP67 (dust-tight, immersion to 1 m)
• Body: full aluminium, up to 20 °C cooler
• Operating temperature: −30 to 85 °C
• Storage temperature: −40 to 85 °C
• Endurance (TBW): 6 000 TB
• MTBF: 2,000,000 hours
• Protection: water, dust, shock, X-ray, magnetic fields
• Compatibility: any CFexpress Type B slot — Canon EOS R5, R5 Mark II, R5 C, R3, R1, C500; Nikon Z6 II, Z8, Z9; Atomos Ninja TX; Blackmagic PYXIS 12K, URSA Cine 12K
• Warranty: limited lifetime, data recovery included
• Part number: EXPC4NB001TB