Feelworld CUT6 6-inch Touch Screen Monitor Recorder Feelworld

Podrobný popis

The Feelworld CUT6 is a six-inch touchscreen monitor that also records. A 1920 × 1080 IPS panel at 450 cd/m², an HDMI 2.0 input that takes up to 4K 60 Hz and a looping HDMI 1.4 output. It records the camera feed onto a USB flash drive as MP4 at up to 1080p30 — optionally with the LUT already applied, which removes the grading step altogether on shorter pieces. A 23 mm, 230 g body, powered from Sony F-series batteries or a 12 V adaptor.

A six-inch Full HD monitor that also records

1920 × 1080 touchscreen, 23 mm body, 230 g

The CUT6 is the first Feelworld monitor to combine monitoring and recording. The six-inch IPS panel runs 1920 × 1080 pixels at 8-bit colour depth and 16.7 million colours; 450 cd/m² and a 1000:1 contrast ratio make it an indoor and open-shade monitor rather than one for harsh sun.

The body is 23 mm thin and weighs 230 grams, so it rides on a camera or a gimbal without upsetting the balance. A three-speed cooling fan sits inside.

Recording to a USB flash drive, with the LUT already applied

MP4 up to 1080p30 from the HDMI input

This is what sets the CUT6 apart from ordinary field monitors: it records the camera feed onto a USB flash drive as MP4 at up to 1080p30. Plug in a FAT32-formatted drive and tap the red record key. Running time depends on the capacity of the drive — an hour of a live show takes roughly 1860 MB.

With the LUT switched on, the file is recorded with the look already baked in. For simple material — behind-the-scenes cuts, social media content — that removes the whole step of applying a LUT in post.

It also helps with live streams from a PTZ camera, which cannot record on its own. Instead of pulling the stream back off the platform or out of OBS, you have a clean camera feed ready to edit — with no waiting for a file to upload and download.

The whole menu is driven by touch

Or by the scroll wheel on the top edge

The interface is new and icon-based — functions open with a tap and a swipe rather than by walking through lists. A double tap opens the main menu, a swipe up from the bottom edge brings out the shortcut menu. The left half of the screen acts as a backlight slider, the right half as a volume slider. A tap beside the menu closes it.

If you would rather not use touch, or you are wearing gloves, the scroll wheel on the top edge does the same job. Touch can be locked with the TOUCH button so that handling the rig does not disturb it.

A red record key and the elapsed time sit at the top of the screen. After about a minute they hide themselves so as not to get in the way; a tap anywhere brings them back.

HDMI 2.0 in and a looping HDMI 1.4 out

Up to 4K 60 Hz in, 1080p60 out

The HDMI 2.0 input accepts up to 3840 × 2160 and 4096 × 2160 at 60 Hz, while the HDMI 1.4 output passes on up to 1080p60 — so the director or a second person on set sees exactly what the operator sees. The monitor drops in behind a DSLR or a mirrorless body.

Audio embedded in HDMI is recorded together with the picture and monitored on the 3.5 mm headphone jack. LUT files and firmware updates travel in on a micro SD card.

A note from the manufacturer: with a 1080i signal one pixel is missing at the edge of the image — it only shows on framed panoramas and has no practical effect.

The LUT travels out on the output too

With the LUT switched on, the HDMI output carries the picture with the look already applied. On a live stream the cinematic feel goes out straight away, with no step in post.

On set that picture can be sent wirelessly to the director or the client for real-time monitoring — they see the result rather than a flat log profile, and nobody has to imagine what the shot will look like after grading.

Tools for precise exposure and focus

Up to fifty custom 3D LUTs

The tool set covers waveform (RGB and YUV), RGB parade, vector scope, histogram (Y, RGB and Y+RGB), embedded-audio phase and level displays, focus peaking, zebra, false colour, zoom, safe-area markers, a nine grid, image flip and anamorphic de-squeeze. Each scope can be switched on on its own, or all of them at once with a single touch in All Scopes mode.

A log-to-Rec.709 conversion is built in, and up to fifty custom .cube tables can be loaded from a micro SD card alongside it. That puts the target look in front of you while you are still shooting.

For HDR there are HLG2020, HLG709 and HLG P3 modes, which widen the dynamic range and show more detail in both highlights and shadows.

Power, running time and mounting

Sony F970 batteries or DC 12 V

A Sony F-series battery plate sits on the back — F970, F960, F950, F930, F770, F750, F730, F570, F550 and F530. The alternative is a 12 V / 1.5 A mains adaptor into the DC input. No battery is included, it is bought separately.

The 8.4 V DC output (5.5 / 2.1 mm barrel) can power the camera. The dummy-battery cable is bought separately to suit the model — the manufacturer lists Sony NP-FW50, Canon LP-E6 and Panasonic DMW-BLF19. Because every camera draws a different amount, it recommends a fully charged high-capacity battery for the job.

Three 1/4"-20 threads — top, bottom and right side — hold the monitor, so it works upright as well as flat. A hot shoe mount is included; its upper part tilts through 180° and the base rotates a full 360°.

• CUT6 monitor recorder
• Micro HDMI cable
• Mini hot shoe mount with hex wrench
• User manual

• Model: CUT6
• Description: 6" HDMI recording monitor
• Screen size: 6" IPS touchscreen
• Resolution: 1920 × 1080 pixels
• Dot pitch: 0.069 × 0.069 mm
• Aspect ratio: 16:9
• Display colours: 16.7 million
• Colour depth: 8 bit
• Brightness: 450 cd/m²
• Contrast ratio: 1000:1
• Backlight: LED
• Viewing angle: 80°/80° (L/R), 80°/80° (U/D)
• Inputs: 1× HDMI 2.0, 1× micro SD (LUT files and firmware)
• Outputs: 1× HDMI 1.4 (loop-out), 1× USB 2.0 (recording), 1× DC 8.4 V
• Recording: MP4 up to 1080p30 to a FAT32 USB flash drive, optionally with LUT
• HDMI input format: SMPTE 720p@50/60 · 1080i@50/60 · 1080p@24/30/50/60; VESA up to 3840 × 2160@60 and 4096 × 2160@60
• HDMI output format: SMPTE 720p@50/60 · 1080p@24/25/30/50/60; VESA up to 1920 × 1080@60
• Audio: records HDMI embedded audio, 3.5 mm stereo headphone jack
• Video assist: waveform (RGB/YUV), RGB parade, vector scope, histogram (Y, RGB, Y+RGB), embedded audio, peaking, zebra, false colour, zoom, safe-area markers, nine grid, image flip, anamorphic de-squeeze, All Scopes mode
• 3D LUT: built-in log to Rec.709, up to 50 custom .cube tables from micro SD, LUT also on the HDMI output
• HDR: HLG2020, HLG709, HLG P3
• Control: touchscreen with touch lock and a scroll wheel
• Cooling: fan, three speeds
• Power: Sony F970/F960/F950/F930/F770/F750/F730/F570/F550/F530 battery plate or DC 12 V (12 V / 1.5 A adaptor)
• Power out: DC 8.4 V, 5.5 / 2.1 mm barrel — powers a DSLR or mirrorless camera (dummy-battery cable sold separately)
• Mounting: three 1/4"-20 threads (top, bottom, right)
• Thickness: 23 mm
• Weight: 230 g