Hollyland Cosmo C2 Wireless Video Transmission Kit 1TX + 1RX Hollyland
Kód: ACOSMO C2 1TX - 1RXXPodrobný popis
Hollyland Cosmo C2 1TX + 1RX is a kit for wireless Full HD video with a line-of-sight range of up to 1,000 m and 33 ms latency. HEVO 2.0 technology hops seamlessly between channels in the 5 GHz band. The receiver has dual HDMI and 3G-SDI outputs, NDI HX3 over a network cable and UVC for a computer, and it can take video from two transmitters. A carry case is included.
A kilometer of range for live production
Transmitter on the camera, receiver in the control room. Cosmo C2 holds 1080p60 over up to 1 km and passes the image on via HDMI, SDI, NDI and USB-C.
Two cameras, one receiver
The Cosmo C2 receiver handles the signal from two transmitters at once. A 2TX + 1RX setup saves devices and cables, reduces interference and keeps both feeds in sync.
1,000 m line of sight
For large halls, open areas and complex buildings.
33 ms latency
The delay stays the same over long distances.
NDI HX3, UVC and RTMP
Video to the network, to a computer or straight to a streaming platform.
FPS Booster
The receiver converts 24/25/30p input into smooth 60p output.
1,000 m range and 33 ms latency
Cosmo C2 carries video up to 1,000 m line of sight, and its 33 ms latency stays the same over long distances. It suits sports coverage, concerts, weddings, church services and ENG.
2TX + 1RX setup
The receiver can take video from two transmitters at the same time. Add one Cosmo C2 TX transmitter to this kit and you have wireless transmission from two cameras to a single receiver.
HEVO 2.0 and seamless frequency hopping
Hollyland’s own HEVO 2.0 technology constantly monitors nearby interference and switches to a clean channel in the 5.15–5.85 GHz band without dropouts. Compared with HEVO 1.0 it offers up to 18% lower latency and up to 186% greater range.
NDI HX3, UVC and RTMP
The receiver supports NDI HX3, so video goes onto the network over a single Ethernet cable. Over USB-C it connects to a computer as a UVC source without a capture card, and Cosmo C2 can also stream via RTMP to YouTube or Twitch.
Connectors for professional rigs
The transmitter has HDMI 1.4b and 3G-SDI inputs and a 3G-SDI loop-out. The receiver offers two HDMI outputs, two 3G-SDI outputs, USB-C and an RJ45 network port. Fractional frame rates are supported.
Power and frozen frame
The transmitter runs on a locking DC input or an NP-F battery, the receiver on a locking DC input or a V-mount battery. If the link drops, the receiver holds the last frame, and you can replace that image with your own logo from a USB flash drive.
- Cosmo C2 wireless video transmitter ×1
- Cosmo C2 wireless video receiver ×1
- Blade antenna ×5
- USB-C OTG adapter ×1
- 12 V / 2 A DC power adapter ×1
- Cold shoe ×1
- Expansion accessory ×1
- Cosmo C2 Carry Case 02 (1TX + 1RX) ×1
- User manual ×1
- Warranty card ×1
- Compliance information card ×1
- Packing list card ×1
- Configuration: 1× transmitter + 1× receiver; the receiver supports 2 transmitters
- Resolution: up to 1080p60, including fractional frame rates
- Range: up to 1,000 m line of sight
- Latency: 33 ms
- Frequency: 5.15–5.85 GHz, 40 MHz bandwidth
- Transmitter: HDMI 1.4b and 3G-SDI input, 3G-SDI loop-out, USB-C (USB 2.0 OTG)
- Receiver: 2× HDMI 1.4b output, 2× 3G-SDI output, USB-C (USB 2.0 OTG), RJ45 100 Mbps
- Streaming: NDI HX3, UVC, RTMP
- Transmitter power: NP-F 6.8–8.4 V or DC 6–16 V
- Receiver power: V-mount 11.8–16.8 V or DC 6–16 V
- Power consumption TX / RX: less than 10 W / less than 11 W
- Transmit power: less than 23 dBm
- Receiver sensitivity: −90 dBm
- Transmitter dimensions: 114.8 × 69 × 35.5 mm
- Receiver dimensions: 142 × 87.2 × 33.2 mm
- Weight TX / RX: 210 g / 440 g
Dodatočné parametre
| Kategória: | Hollyland wireless video systém |
|---|---|
| Záruka: | 2 roky |
| EAN: | 6976068117445 |
Diskusia
Buďte prvý, kto napíše príspevok k tejto položke.
Len registrovaní používatelia môžu pridávať príspevky. Prosím prihláste sa alebo sa zaregistrujte.
