Hollyland LARK M2S Camera Receiver (Space Gray) Hollyland

Podrobný popis

Stand-alone Hollyland LARK M2S camera receiver for cameras, camcorders, computers and phones. It mounts in a cold shoe, outputs audio via 3.5 mm TRS or USB-C, and the volume is set with a knob with three LEDs. It weighs 12 g and runs for approx. 8.5 hours.

The receiver outputs via 3.5 mm TRS and USB-C at the same time, so you can record to the camera and, through an adapter cable, to a second device simultaneously. Press the knob to switch mono and stereo; a button turns on noise cancellation.

Wireless audio into your camera

The LARK M2S receiver sits in the cold shoe and feeds the audio of two speakers into the camera.

3.5 mm TRSUSB-Cmono / stereoapprox. 8.5 h

For LARK M2S kits

The receiver adds to or replaces a unit in LARK M2S kits with a camera receiver.

Volume knob

Turn to adjust the volume; three LEDs show the level.

300 m range

Up to 300 m line of sight, 40 m without.

Easy control

The side button turns on noise cancellation and mute, the knob changes the volume and switches mono and stereo when pressed. LEDs show the status.

• LARK M2S camera receiver ×1

• Compatibility: Hollyland LARK M2S kits
• Outputs: 3.5 mm TRS, USB-C (both simultaneously)
• Mounting: cold shoe
• Wireless transmission: 2.4 GHz adaptive frequency hopping (AFH), GFSK 2 Mbps
• Transmission range: up to 300 m line of sight, 40 m non-line of sight
• Sample rate / bit depth: 48 kHz / 24 bit
• Battery: 145 mAh / 3.87 V
• Operating time: approx. 8.5 h
• Charging time: approx. 1 h
• Dimensions: approx. 40.5 × 25.5 × 13 mm (excluding cold shoe)
• Weight: approx. 12 g
• Operating temperature: −10 to 45 °C
• Charging temperature: 0 to 45 °C
• Colour: Space Gray