Hollyland LARK M3 Combo 2TX&1RX (USB-C RX) Hollyland

Podrobný popis

The Hollyland LARK M3 Combo 2TX&1RX is a compact wireless microphone kit for two speakers: two transmitters and a USB-C receiver for a phone, tablet or computer, all in a charging case. Each transmitter weighs just 9 g and attaches magnetically to clothing. The system delivers 48 kHz / 32-bit float audio, AI noise cancellation in three levels and a range of up to 300 m.

LARK M3 is modular: one receiver handles up to four transmitters and one transmitter pairs with up to four receivers. The receiver can be a camera receiver or a USB-C receiver, and transmitters or receivers can be added or removed during a shoot without interrupting the recording.

Clean sound for the whole group

Up to four transmitters and four receivers, 32-bit float audio and AI noise cancellation in a kit that fits in your pocket.

48 kHz / 32-bit floatAI noise cancellation9 g transmitter300 m range

Magnetic mounting

The 26.5 mm transmitter attaches magnetically anywhere on clothing, and at 9 g it does not pull the fabric even when worn all day.

Your voice, your way

Eight vocal presets and one-tap vocal enhancement with de-essing are set in the app. Each transmitter can use its own preset.

Everything in one case

The charging case holds the transmitters, receivers, 3.5 mm cables and furry windshields, and its safety lock keeps them in place even in a backpack.

Primary and secondary receivers

With several receivers the system assigns a primary one that changes transmitter settings and secondary ones that only monitor status. If the primary goes offline, roles switch automatically and the recording continues.

4 independent tracks

Connected to a computer via USB-C, compatible software records four separate tracks, one per speaker.

Auto-limit

Clip protection tames sudden peaks and balances excessive volume levels.

HDT transmission

Hollyland's proprietary wireless technology moves data 50% faster than the previous generation.

MFi and power

Apple MFi certification for iOS devices and continuous use with USB-C power.

Mix and match your setup. LARK M3 comes in four kits that differ in the number of transmitters and receivers. The system can be expanded with further transmitters and receivers, up to four of each.

AI noise cancellation. A deep-learning model reduces wind, running water, traffic rumble, car horns and air-conditioning hum. Choose one of three levels (10, 15 or 20 dB) to suit the environment.

Quick actions. Mute a transmitter with its own button or in the app, triple-press the button to start recording, and play back without unplugging the receiver while it runs on USB-C power.

What is in the box. All parts of this kit according to the manufacturer's packing list.

• Transmitter ×2
• USB-C receiver ×1
• 2TX&1RX charging case ×1
• Magnet ×2
• Furry windshield ×2
• Carrying bag ×1
• USB-C to USB-C cable ×1
• Packing list card ×1
• Warranty card ×1
• Compliance information card ×1
• Quick guide ×1

• Kit: LARK M3 Combo 2TX&1RX
• Transmitters: 2
• Receivers: 1× USB-C
• System expansion: up to 4 transmitters and 4 receivers
• Wireless transmission: 2.4 GHz adaptive frequency hopping, QPSK 3 Mbps
• Range: up to 300 m (open space, no interference)
• Polar pattern: omnidirectional
• Sensitivity: −37 dBV ±2 dBV @ 1 kHz, 94 dB SPL
• Frequency response: 20 Hz – 20 kHz
• Signal-to-noise ratio: ≥ 70 dB
• Max. SPL: 125 dB SPL
• Sample rate and bit depth: 48 kHz / 24-bit and 48 kHz / 32-bit float (32-bit float only in third-party apps on Apple devices, Android up to 24-bit)
• Noise cancellation: AI, 3 levels (10 / 15 / 20 dB)
• Transmitter battery: approx. 95 mAh, 3.87 V
• Transmitter runtime: approx. 8 h (noise cancellation off), 4–4.5 h (on)
• Charging time: transmitter approx. 1.5 h, case approx. 2.5 h
• Charging temperature: 0 – 45 °C
• Operating temperature: −10 – 60 °C
• Dimensions: transmitter ⌀ 26.5 × 10 mm, USB-C receiver 40 × 16.5 × 9 mm
• Weight: transmitter 9 g, USB-C receiver 5.9 g
• Colour: Space Gray