Insta360 X3 Invisible Dive Case V2 Insta360

Podrobný popis

The Insta360 X3 Invisible Dive Case V2 lets you capture 360° footage down to 50 m. Its special dome compensates for water refraction to help prevent image distortion and stitching issues, while the bottom of the case stays invisible in the shot. This case is designed exclusively for the Insta360 X3. Update the camera firmware to v1.0.80 or later before use. The case weighs approximately 134 g.

Immerse yourself in 360° footage with the X3 camera

The Insta360 X3’s invisible underwater case keeps the bottom portion out of the final 360° shot, and its special dome compensates for water refraction to minimize distortion and image stitching issues. The X3 camera must have firmware version 1.0.80 or later. The housing is designed exclusively for the X3 model and allows for shooting at depths of up to 50 m.

Seamless Underwater Image Stitching

The 360° shooting design helps stitch the footage without the housing’s bottom being visible. The IPX8-certified protective housing is suitable for diving and other water activities. When mounting it on an invisible selfie stick, tighten the screw and keep the housing and the stick in a straight line so that the stick does not appear in the final image.

• Insta360 X3 Invisible Dive Case ×1
• Anti-fog insert ×10
• 1/4″ mount adapter ×1
• 1/4″ thumb screw ×1
• Protective pouch ×1
• Anti-slip ring ×4
• Thumb screw wrench ×1
• Lens cloth ×1
• User manual and warranty card ×1

• Compatibility: Insta360 X3
• Maximum depth: 50 m (164 ft)
• Waterproof rating: IPX8
• Weight: approx. 134 g
• Dimensions (W × H × D): 84.2 × 154.6 × 83.6 mm
• Required firmware: X3 v1.0.80 or later