K&F Concept Fujifilm NP-W126S 1300mAh Battery, 3-Pack + 3-Slot Charger K&F Concept

Podrobný popis

Three Fujifilm NP-W126S 1300 mAh batteries and a triple-slot charger with LCD that charges them all at once. It runs off USB-C, so a power bank, a laptop or the car will top them up. The charger doubles as a carrying box for the batteries. Fully decoded chip: the camera shows the remaining capacity and raises no third-party battery warning. For Fujifilm X-T30 II, X-T30, X-T20, X-T10, X-T3, X-T2, X-T1, X-M5, X-M1, X100VI and other models.

Three 1300 mAh batteries

Three full-size 1300 mAh batteries work out at roughly 325 shots each — about 975 for the whole set. In video one battery lasts around 53 min, measured on 3840 × 2160/24P.

Triple-slot charger

The triple-slot charger draws power over USB-C, so a power bank, a laptop or a car charger will do. With a 20 W PD adapter all three in 3.5 h. From an ordinary 5 V source it takes 5 h.

The state is obvious at a glance: a white LED means powered on, breathing red charging below 80 %, breathing blue charging above 80 % and steady green fully charged. The charger housing is made of fire-resistant material and watches temperature, over-voltage, over-discharge, over-current, over-charge and short circuit.

• Triple-slot case charger with LCD — 1 pc
• Fujifilm NP-W126S 1300 mAh battery — 3 pcs
• USB-C cable — 1 pc
• User manual — 1 pc

• Battery type: Fujifilm NP-W126S
• Capacity: 1300 mAh
• Voltage: 7.4 V
• Energy: 9.62 Wh
• Cell chemistry: Li-ion
• Batteries included: 3 pcs
• Charger: triple-slot case charger with LCD, USB-C input
• Charger input: USB-C, 9 V / 2 A (20 W PD)
• Charge time — 3 batteries: ≈ 3.5 h
• Charge time — 3 batteries, ordinary source: ≈ 5 h
• LED indication: steady white = powered on · breathing red = charging < 80 % · breathing blue = charging ≥ 80 % · steady green = charged
• Protections: temperature, over-voltage, over-discharge, over-current, over-charge, short circuit
• Charger housing: fire-resistant material, doubles as a carrying case
• Runtime — stills: ≈ 325 shots per battery
• Runtime — video: ≈ 53 min per battery (3840 × 2160/24P)
• Fully decoded chip: yes — the camera shows remaining capacity and raises no third-party battery warning
• Compatibility: Fujifilm X-T30 II, X-T30, X-T20, X-T10, X-T3, X-T2, X-T1, X-M5, X-M1, X100VI, X100V, X100F, X-A1, X-A2, X-A3, X-E1, X-E2, X-E3, X-H1, X-Pro1, X-Pro2, X-Pro3