Libec GS-750PDB Libec

Kód: AGS-750PDBX
€7 064,68 €5 743,64 bez DPH Jednotková cena:
Vypredané
Položka bola vypredaná…

Detailné informácie

Podrobný popis

The Libec GS-750PDB is a complete GS series pedestal system for shoulder cameras up to 17 kg in its outside broadcast version. The GH75 head offers continuous Perfect Balance counterbalance across 5.5–14 kg with a counterbalance meter. The pneumatic column with a 75 cm stroke is set with the supplied pump to match the camera weight. The system height is 100–175.5 cm.

The GS-750PDB system puts a shoulder camera of up to 17 kg on a mobile pneumatic pedestal for outside broadcasts. It combines the GH75 head with continuous Perfect Balance counterbalance and a counterbalance meter, the compact pneumatic P110B pedestal on the DL-8RB dolly and a pair of PH-8B pan handles. The system weighs 21 kg and adjusts from 100 to 175.5 cm.

A pedestal system up to 17 kg

GH75 head, P110B pedestal with DL-8RB dolly and two PH-8B pan handles in one system.

17 kg payloadPerfect BalancePneumatic columnHeight 100–175.5 cm100 mm bowl125 mm casters

Height on a cushion of air

The upper column is supported by air pressure, set with the supplied pump to match the weight of camera and accessories. A double bearing system prevents wobbling even during quick vertical moves.

Balanced at any angle

The GH75 head with continuous Perfect Balance counterbalance keeps the camera balanced at any tilt angle across 5.5–14 kg (C.G. 125 mm). Two PH-8B pan handles give a secure grip for smooth control.

Large casters

Ø125 mm casters provide quick, smooth movement. The double stopper locks a wheel with a single touch.

Smooth in freezing cold and heat

The layered metal drag unit with special silicone grease gives smoother starts and stops and better backlash control. It keeps the same feel from −40 to +60 °C.

Drag 0 + 7 steps

Seven drag steps plus a friction-free zero position, with no need to store the head in it.

Aluminum levers

All locking levers on the head are aluminum instead of plastic, built for demanding professional use.

One-touch plate

The camera plate attaches with a single touch and slides ±55 mm.

30 kg pedestal payload

The P110B pedestal carries 30 kg including the head, and its two-stage column has a 75 cm stroke.

Counterbalance meter. A scale by the counterbalance knob shows the spring strength, so your preferred setting is easy to remember and restore.

Sliding plate lock. The redesigned sliding plate lock is more intuitive to use, so the camera goes on faster and fore-and-aft balance is fine-tuned right on location.

Illuminated bubble level. An LED-lit bubble level makes levelling easy even in a dark studio or at night.

Accessory threads. 1/4" and 3/8" threads on the side of the head base take an articulating arm for a monitor, light or other accessory. Because they sit on the base, they do not affect the payload, center of gravity or balance of the head.

GH75 counterbalance chart. The vertical axis shows the height of the camera’s center of gravity above the plate, the horizontal axis the total weight of camera and accessories. The area between the curves is the range the head can balance; a shoulder camera typically sits around 125 mm. At maximum spring strength the tilt is limited to ±40°.


  • Libec GH75 video head ×1
  • Libec P110B pneumatic pedestal (P110 column, DL-8RB dolly) ×1
  • Libec PH-8B pan handle ×2
  • Air pump ×1

  • Brand: Libec
  • Model: GS-750PDB
  • Type: pedestal system, outside broadcast version
  • Components: GH75 head, P110B pedestal, 2× PH-8B pan handle
  • Payload: 17 kg
  • Pedestal payload: 30 kg including head
  • Counterbalance range: 5.5–14 kg (C.G. 125 mm)
  • Counterbalance: Perfect Balance, continuous, with meter
  • Drag: free + 7 steps
  • Tilt angle: +90° to −70° (±40° at maximum spring)
  • Head operating temperature: −40 to +60 °C
  • Bubble level: illuminated (LED)
  • Camera plate: sliding, one-touch
  • Sliding range: ±55 mm
  • Long sliding plate: optional
  • Head base: 100 mm ball
  • Plate attachment: 2× 3/8" screw
  • Spare screw: 3/8"
  • Accessory threads: head: 1/4" and 3/8"
  • Head attachment: 100 mm bowl
  • Column: two-stage, upper column supported by air pressure
  • Column stroke: 75 cm (38 + 37 cm)
  • Pressure adjustment: air pump (supplied with the pedestal)
  • Dolly: DL-8RB, 125 mm casters, double stopper
  • Height: 100–175.5 cm
  • Weight: 21 kg

Dodatočné parametre

Kategória: Filmové tripody
Záruka: 2 roky
Položka bola vypredaná…

Diskusia

Buďte prvý, kto napíše príspevok k tejto položke.

Len registrovaní používatelia môžu pridávať príspevky. Prosím prihláste sa alebo sa zaregistrujte.

Nevypĺňajte toto pole

Bezpečnostná kontrola