Peragos Tube 60C PIXEL - 4 Light Kit Vibesta

Podrobný popis

The Vibesta Peragos 60 C Pixel is a 2′ (62cm) weatherproof pixel animated LED tube, so you can use it in a variety of weather conditions. It has 16 Pixels, 40W of power, and a color temperature range of 2800K to 13000K. The TLCI of 93±1 and the CRI of 96±2 throughout the full adjustment range. The Peragos 60C Pixel Tube features a 220° tube lens to help create a soft, wide beam spread.

Key features:

• 2′ (62cm) weatherproof LED tube
• 16 animatable pixels
• 40W power
• Wide CCT range 2800K to 13000K
• Extendable controller & battery
  
  

Pixel Set
Pixel animations can spread across one tube but also across a Pixel Set of multiple tubes for complex setups.

Brighter Than You Expect
With 40W power for the Peragos Tube 60C Pixel, you have significant brightness at your hands with full-color tunability. Continuous Boost Mode enables you to boost the brightness to 40W without a time limit and without negative effects for the fixture.

The tube light uses custom algorithms to mix the light from several LEDs with various colors. Each individual light is calibrated so that there is virtually no tolerance from fixture to fixture. With a system called Source Match, you are able to match any light source. You just need to enter the x/y coordinates you measured from another light and your fixture will be an exact match.

Other Features
The light has various operating modes including CCT, Filter Mode, HSI Mode, x/y Coordinate, RGB Mode, and Effects. The Gel library consists of more than 300 widely used filters.

RTX Control App
With the RTX control App, you don’t need to be an engineer to create complex lighting setups. Change the way you work with lights, create complex lighting setups with a simple to use interface, and bring your lighting ideas to life easily. 

Extendable Controller & Battery
The tube uses an exchangeable Smart Li-Ion battery that is claimed to be able to power the fixtures for up to 20 hours. The 4 battery charger allows you to recharge multiple units at once and even from within their case. When the AC adapter is connected to the controller and the Smart Li-Ion battery pack is attached it automatically charges during operation.

Rigging
With a variety of mounting points and specialized accessories for certain setups, you can mount the Peragos Tube in any way you can imagine.

Key Features

• 62 cm long weatherproof RGBW LED tube
• With 16 animatable dots
• 40 W output
• Wide color temperature range 2800K-13000K
• Removable driver/battery

Brighter than you expect
With 40W of power, you have a substantial brightness range with a wide color setup. The Continuous Boost mode allows you to increase the brightness to 40 W, continuously, without any negative impact on the electronics. Pixel animations can be done within a single tube or in a set of tubes ("Pixel Set ") for complex effects.

The light uses proprietary algorithms for mixing light from multiple colored LEDs and is calibrated to minimize color variance between individual fixtures. Thanks to Source Match technology, it is possible to match light sources to each other: just enter the X/Y coordinates you measured for another light... The light also offers various operating modes including CCT, filter mode, HSI mode, X/Y coordinates, RGB mode and effects. The virtual gel library consists of over 300 widely used filters.

RTX, battery
With the RTX control app, you can easily create even complicated lighting setups. Change the way you work with lights, create complex lighting with an easy-to-use interface!

The tube uses a replaceable smart Li-Ion battery that offers up to 20 hours of operation. The 4-battery charger allows you to charge multiple units at once; when you connect the AC adapter to the controller, the battery automatically charges during operation.

With various mounting elements and specialized accessories, you can place Peragos tubes virtually anywhere and work with light without limiting your creativity.

Includes

• 4x LB-60C Turbo Peragos light tubes
• 4x PTPC Peragos Tube PIXEL Controllers
• 4x SCPT Side Cap Mount with 1/4" thread
• 4x Nanocore RBPT Rail Mount Base with 1/4"-20 and 3/8"-16 ARRI threads
• 4x Nomis SDR 1/4" bolt with ring
• 1x Nomis AD18-1 18V=/3.75A power adapter
• 1x IEC C13 power cable
• 1x 4CBC-1 4 Channel Charger for SLB-1
• 1x ToughTec PTC-1 bag
• 4x li-ion battery SLB-1