RGBLink TAO 1pro SDI RGBlink

Podrobný popis

The RGBlink TAO 1pro SDI is a portable NDI encoder and decoder with a 5.5-inch Full HD touchscreen. Besides an HDMI 1.3 input and two USB 3.0 inputs for UVC cameras, it has a professional SDI input (BNC), so it can also put the picture from a professional camera on the network. The HDMI 2.0 output handles up to 3840 × 2160 at 60 Hz; power comes via USB-C or from a battery.

A camera with SDI output, a webcam and a computer meet in one tablet-sized device. You watch the picture on the screen, send it to the network as NDI and record it to a USB drive.

SDI input for professional cameras

The TAO 1pro SDI accepts the signal from a professional camera via a BNC connector, alongside an HDMI 1.3 source and two UVC cameras using USB 2.0 or USB 3.0. The built-in encoder sends the picture to the network as an NDI source, and the HDMI 2.0 output feeds a monitor or projector.

Touchscreen and NDI decoder

The 5.5" display with 1080 × 1920 pixels and 450 cd/m² brightness is used for preview and for fingertip setup. The NDI decoder works the other way round: it receives a stream from the network and sends it to the HDMI output. Picture rotation on the screen and on the HDMI output is set independently, and the built-in speaker lets you check the sound.

Power from USB-C or a battery

It is powered via USB-C with PD support (9 V / 2 A, max. 18 W). The back carries a standard battery slot for Sony NP-F970 and Panasonic AG-VBR59MC batteries; the standard version ships without a battery. Audio goes through the 3.5 mm jack input and output, recording through the USB 2.0 port.

More information

TAO 1pro-S is an NDI encoder/decoder with a 5.5-inch FHD preview display, which also comes with 1 professional SDI input, 1 HDMI 1.3 input and 2 USB 3.0 inputs.

TAO 1pro-S is compatible with standard USB 2.0 and USB 3.0 cameras via the UVC protocol.

TAO 1pro-S has a touch panel for configuration with a fingertip and can take two optional rechargeable batteries that extend its operation outdoors.

• RGBlink TAO 1pro SDI

• Video inputs: 1× HDMI 1.3 (HDMI-A), 1× SDI (BNC), 2× USB 3.0 (USB-A, UVC cameras)
• Video output: 1× HDMI 2.0 (HDMI-A)
• Recording: 1× USB 2.0 (USB-A)
• Audio: 1× 3.5 mm jack input and 1× output, built-in speaker
• Network: 1× RJ45 (LAN), NDI encoding and decoding
• Power: 1× USB-C (PD), 9 V / 2 A, max. 18 W
• Battery: slot for Sony NP-F970 and Panasonic AG-VBR59MC, battery not included
• HDMI input resolutions (SMPTE): 720p at 50/60 Hz, 1080p at 23/24/60 Hz
• HDMI input resolutions (VESA): 1024×768, 1280×720, 1280×800, 1280×1024, 1360×768, 1600×1200, 1680×1050 and 1920×1080, all at 60 Hz
• HDMI output resolutions (SMPTE): 720p at 50/60 Hz, 1080p at 24/25/50/60 Hz, 2160p at 60 Hz
• HDMI output resolutions (VESA): 1024×768, 1280×800, 1280×1024 and 1360×768 at 60 Hz; 1280×720 and 1920×1080 at 50/60 Hz; 3840×2160 at 60 Hz
• Standards: HDMI 1.3 (input), HDMI 2.0 (output), USB 3.0
• Display: 5.5" TFT, 1080 × 1920 pixels, 16:9 aspect ratio, LED backlight
• Dot pitch: 0.063 × 0.021 mm (H × W)
• Brightness and contrast: 450 cd/m², 1000:1
• Viewing angle: 80°/80° left/right, 80°/80° up/down
• Operating temperature and humidity: 0–55 °C, 5–85 %
• Weight: 350 g without battery, 882 g with battery; packed 770 g
• Dimensions: 161 × 106 × 36 mm; package 255 × 145 × 85 mm
• Interlaced (i) signals are not supported on input or output
• Changing the signal format requires a restart
• Encoding and decoding latency depends on the network