Saramonic Blink500 T4 Saramonic
Kód: ABLINK500 T4XPodrobný popis
The Saramonic Blink500 T4 is a 2.4 GHz wireless microphone system for four speakers. Four transmitters with built-in microphones and supplied lavalier mics send audio to a single receiver, which outputs it mixed to mono, in stereo or as four separate tracks. It suits interviews, podcasts, conferences and multi-person shoots; the range is up to 100 m and a transmitter runs for approximately 12 hours.
Saramonic Blink500 T4
Four transmitters, one receiver and four lavalier microphones in a hard case. Every speaker can get their own track in post-production.

Transmitter with a built-in microphone
Each transmitter has a 4 mm omnidirectional condenser microphone, so you can simply clip it onto clothing. The supplied SR-M1 lavalier microphone plugs into its 3.5 mm input. The +/- buttons set the gain in seven levels, and pressing both together turns noise cancellation on.
One receiver for four transmitters
The receiver pairs with up to four transmitters. Its 3.5 mm TRRRS output delivers audio mixed to mono, split into stereo or as four separate tracks. The 3.5 mm headphone output lets you monitor the sound continuously, and the MUTE button silences the whole output.
Stereo or four tracks
In stereo, transmitters 1 and 3 go to the left channel and transmitters 2 and 4 to the right. The supplied 3.5 mm TRRRS to 4× 3.5 mm TRS cable breaks out four separate tracks; the optional SR-C2026 cable takes them to the XLR inputs of a mixer or recorder.
Everything in one case
The transmitters, receiver, lavalier microphones and cables each have their own place in the zippered hard case. The kit is packed as soon as the shoot is over and nothing gets lost.
Approximately 12 hours of operation
A transmitter with a 300 mAh battery runs for approximately 12 hours, the receiver with a 400 mAh battery for approximately 8 hours. The units charge over USB-C in about 2.5 hours; the box contains two charging cables, each splitting into three USB-C connectors.
48 kHz / 24-bit audio
A frequency response of 20 Hz to 20 kHz, a signal-to-noise ratio above 80 dB and a maximum SPL of 120 dB. Transmission latency is 25 ms.
Noise cancellation
The noise cancellation algorithm reduces ambient noise while keeping the 48 kHz format. It is switched on separately on each transmitter, and the indicator then lights green.
Paired at the factory
The transmitters and receiver connect by themselves when switched on. If the link is lost, hold the power button for 5 seconds on the switched-off units and they re-pair within 10 seconds.
Camera and phone
A 3.5 mm TRRRS to TRS camera cable and a 3.5 mm TRRRS to TRRS phone cable are both in the box. Both are designed specifically for this receiver.

Clip, mic input and USB-C
The back of the transmitter carries a fixed clip, the side a 3.5 mm input for the lavalier microphone with a USB-C charging port below it. The transmitter measures 60.8 × 42.5 × 16.2 mm and weighs 34 g, so it does not drag clothing down.

On set and on the road
The hard case protects the whole kit in transit. The system suits interviews, round tables, podcasts, live streams and multi-camera productions where the voices of several people need to stay separate.
Additional information
Saramonic Blink500 T4 is a professional four-person wireless microphone system. One receiver captures up to four transmitters simultaneously and provides mixed, stereo or independent four-track output for precise post-production. Operating in the 2.4 GHz band, it transmits 48 kHz/24-bit audio up to 100 m line of sight and offers intelligent noise cancellation, seven-level gain adjustment and live monitoring. Four transmitters with built-in omnidirectional microphones and inputs for the supplied SR-M1 lavaliers suit interviews, conferences, podcasts, livestreams and multi-camera productions.

- Blink500 T4 TX transmitter — 4×
- Blink500 T4 RX receiver — 1×
- SR-M1 omnidirectional lavalier microphone with foam windscreen and clip — 4×
- 3.5 mm TRRRS to 3.5 mm TRS camera cable — 1×
- 3.5 mm TRRRS to 3.5 mm TRRS phone cable — 1×
- 3.5 mm TRRRS to 4× 3.5 mm TRS cable — 1×
- USB-A to 3× USB-C charging cable — 2×
- Hard carrying case — 1×
- Type: Four-channel wireless microphone system
- Kit: 4 transmitters + receiver + 4 lavalier microphones
- Wireless band: 2.4 GHz, GFSK modulation
- Number of channels: 4 simultaneously
- Output modes: Mono / stereo / 4 separate tracks
- Transmission range: Up to 100 m (open space without interference)
- RF output power: < 10 mW
- Frequency response: 20 Hz – 20 kHz
- Sample rate / bit depth: 48 kHz / 24-bit
- Signal-to-noise ratio: > 80 dB
- Max SPL: 120 dB SPL (built-in microphone)
- Built-in microphone sensitivity: −39 ±2 dB (0 dB = 1 V/Pa at 1 kHz)
- Built-in microphone: Condenser, 4 mm, omnidirectional
- Latency: 25 ms
- Noise cancellation: Yes
- Gain control: 7 levels (on the transmitter)
- Transmitter input: Built-in microphone or 3.5 mm TRS mic input
- Receiver output: 3.5 mm TRRRS (LINE OUT)
- Monitoring: 3.5 mm TRS headphone output
- Display: No
- Onboard recording: No
- Transmitter dimensions: 60.8 × 42.5 × 16.2 mm
- Transmitter weight: 34 g
- Receiver dimensions: 56 × 38 × 17.4 mm
- Receiver weight: 30 g
- Transmitter battery: 3.7 V / 300 mAh
- Transmitter battery life: Approximately 12 hours
- Receiver battery: 3.7 V / 400 mAh
- Receiver battery life: Approximately 8 hours
- Charging: USB-C (5 V), approximately 2.5 hours
- Transmitter clip: ABS + PC, fixed
- Operating temperature: 0 to 50 °C
- Storage temperature: −20 to 50 °C
- Colour: Black
Dodatočné parametre
| Kategória: | Klopové mikrofóny sady |
|---|---|
| Záruka: | 2 roky |
| EAN: | 6974700655638 |
Diskusia
Buďte prvý, kto napíše príspevok k tejto položke.
Len registrovaní používatelia môžu pridávať príspevky. Prosím prihláste sa alebo sa zaregistrujte.




