SmallRig 4-Arm Suction Cup Camera Mount Kit SC-15K 3565 SmallRig
Kód: A3565BXPodrobný popis
The SmallRig SC-15K 3565 four-arm suction cup mount rigs a camera to a car or any clean, smooth surface. Rated at 120 kg horizontal and 30 kg vertical suction, it works from -20 to 60 °C and its half ball head takes Arca-Swiss and DJI RS plates.
1. Load capacity of 120 kg.
2. Quick release via a NATO clamp.
3. A comprehensive solution to the power supply and image transmission.
4. The Half-ball head locks the mount while allowing for fine adjustment of shooting angles.
5. Supports Arca-Swiss and DJI RS stabilizer quick-release plate for quick switch between car, handheld, and stabilizer shooting.
Disclaimer: Please mount it onto recommended surfaces and check at least every four hours.
Note:
1. Suitable for clean and glossy surfaces, not for rough, uneven, dirty, or fragile surfaces.
2. Please always keep the sucker and filter cotton intact and clean.
3. Please apply it carefully to coated surfaces.
4. When the safety-line indicator shows, it means vacuum loss. Pump the plunger until 100% vacuum pressure.
5. It better work with a camera cage.
Warnings:
1. The 4-Arm Suction Cup Camera Mount Kit, when adhering to a still object, has a tested maximum horizontal suction of 120 kg and maximum vertical suction of 30 kg. Please check the suction force every 24 hours.
2. It is recommended, when adhering to a vehicle, the 4-Arm Suction Cup Camera Mount Kit works with a cable tether and bears no more than 15kg. Please run the vehicle smoothly at a speed of below 80km/h and check the suction force every 2 hours.
3. Suitable for dry, flat, glossy, solid surfaces, not for painted surfaces, natural marble, old tiles, breathable wallpaper, diatom mud walls, unpainted wood, frosted glass, and other rough or breathable materials.
4. Works at -20°C to 60°C.
5. When the safety-line indicator shows, it means vacuum loss. Pump the plunger until 100% vacuum pressure.
6. Please follow the instructions. Products that are damaged due to improper use are not eligible for after-sales service.
4 x 4″ Vacuum Suction Cup
3 x Magic Arm
1 x Half Ball Head
1 x Magic Arm with Lens Support
1 x Battery Adapter Plate
2 x Cable Tether
1 x Velcro
1 x Storage Case
Product Dimensions: 424.8 x 300.0 x 58.8mm
Package Dimensions: 363 x 271 x 142mm
Product Weight: 3433g±5g
Package Weight: 4328g±5g
Material(s): Aluminum Alloy, NBR, ABS, Stainless Steel
Dodatočné parametre
| Kategória: | SmallRig pre akčné kamery a Osmo Pocket |
|---|---|
| Záruka: | 2 roky |
| EAN: | 6941590014272 |
| Položka bola vypredaná… | |
Diskusia
Buďte prvý, kto napíše príspevok k tejto položke.
Len registrovaní používatelia môžu pridávať príspevky. Prosím prihláste sa alebo sa zaregistrujte.
