Tilta 12V Micro DC Male to Z CAM S6/F6 2-Pin Power Cable Tilta

Podrobný popis

The Tilta TCB-2LE-DCM13 is a 12V Micro DC → 2-pin power cable for the Z CAM E2C, E2-S6 and E2-F6 cameras. It plugs into the 12V Micro DC output of a Tiltaing battery side handle and into the camera's 2-pin power input, so the camera runs from the battery in the handle with no battery of its own. Length 40.6 cm (16″); copper conductors, stainless steel connectors.

The Tilta TCB-2LE-DCM13 is the cable Tilta uses to power a Z CAM from the battery handle: the handle's 12V DC output on one end, the locking 2-pin plug for the camera on the other. The battery then hangs in your hand, where it balances the rig, rather than on the camera body.

12V Micro DC → the Z CAM 2-pin power input

The right-angled Micro DC plug goes into the 12V DC output of a Tiltaing battery side handle — the handle with a Sony F970 battery has this output next to the 8V Micro-USB for the Nucleus Nano motor. The other end is a locking 2-pin plug for the power input of the Z CAM E2C, E2-S6 and E2-F6 cameras. The camera then runs from the battery in the handle, no extra pack has to sit on the camera body and the rig stays compact.

41 cm of straight cable in stainless steel and copper

The 40.6 cm (16 inch) length is built for the run from the side handle to the camera's power input inside the cage — with no loop for a hand to catch on. The conductors are copper, the connector bodies stainless steel. The right-angled DC plug keeps the cable along the handle; the 2-pin connector locks in the camera and will not pull out from a tug on the cable.

Tilta cables

The Tilta TCB cable range links camera, battery and accessories on the rig: power from a V-Mount or Gold Mount plate over P-Tap, 2-pin Lemo, 3-pin Fischer or a DC barrel connector, USB-C PD for monitors and handles, 7-pin control cables for the Nucleus system and HDMI or BNC for the picture. Lengths follow the rig — short on the cage, longer out to arms and batteries; this cable is one of them.

• 12V Micro DC → 2-pin cable (Z CAM E2C / E2-S6 / E2-F6) — 1×

• Connectors: 12V Micro DC plug, right-angled → 2-pin plug (Z CAM E2C / E2-S6 / E2-F6 power input)
• Length: 40.6 cm (16″)
• Type: straight cable
• Materials: copper, stainless steel
• Color: black
• Compatibility: Z CAM E2C, E2-S6 and E2-F6 cameras (2-pin power input); source with a 12V Micro DC output — Tiltaing battery side handles (Side Power Handle Type II with F970 battery)