Tilta 2-Pin Lemo to 5.5/2.5mm DC Male Cable Tilta

Podrobný popis

The Tilta TCB-2LE-525-17 is a 2-pin Lemo → DC 5.5/2.5 mm power cable. It plugs into the 2-pin Lemo output of a battery plate or power module on the rig and powers accessories with a 5.5/2.5 mm DC barrel input — a monitor, transmitter or light — from the camera's main battery. Length 40 cm; the DC plug is right-angled.

The Tilta TCB-2LE-525-17 is the short cable for accessories right on the cage: from the 2-pin Lemo output of a Tilta Mini PD battery plate, a plate for Blackmagic PYXIS or Sony FX9, to a monitor or transmitter a few centimetres away. A device with a 5.5/2.5 mm DC input then runs from the main battery and needs no pack of its own.

2-pin Lemo → DC 5.5/2.5 mm

The 2-pin Lemo plug goes into the 2-pin Lemo power output of the battery plate or module and locks in the socket. The other end is a right-angled 5.5/2.5 mm DC plug for the barrel socket of monitors, video transmitters, LED lights and other accessories with this input. The cable passes the source voltage through unchanged, so it belongs on devices that accept that voltage. The version with the thinner 2.1 mm pin is the sibling TCB-2LE-521-17.

40 cm of straight cable with a right-angled plug

The 40 cm length is for accessories that sit on the cage or on a short arm near the battery plate — the cable makes no loop to tangle in your hands. The conductors are copper, the jacket rubber and the connectors aluminium alloy. The right-angled DC plug keeps the cable close to the device body so it does not stick out; the locked Lemo connector will not pull out from a tug on the cable.

Tilta cables

The Tilta TCB cable range links camera, battery and accessories on the rig: power from a V-Mount or Gold Mount plate over P-Tap, 2-pin Lemo, 3-pin Fischer or a DC barrel connector, USB-C PD for monitors and handles, 7-pin control cables for the Nucleus system and HDMI or BNC for the picture. Lengths follow the rig — short on the cage, longer out to arms and batteries; this cable is one of them.

• 2-pin Lemo → DC 5.5/2.5 mm cable — 1×

• Connectors: 2-pin Lemo plug → DC 5.5/2.5 mm plug, right-angled
• Length: 40 cm
• Type: straight cable
• Materials: copper, rubber, aluminium alloy
• Color: black
• Compatibility: source with a 2-pin Lemo output — Tilta battery plates (Mini PD V-Mount, plates for Blackmagic PYXIS and Sony FX9, Power Pass-through Plate for DJI RS 4); accessories with a 5.5/2.5 mm DC input (monitors, video transmitters, lights)