Tilta 4-Pin Male to 8-Pin Female Coiled Power Cable Tilta

Podrobný popis

The Tilta TCB-4LEM-8LEF is a coiled 24 V power cable for the ARRI ALEXA 35: a 4-pin plug on the module side and an 8-pin socket on the camera side. It carries power from the Tilta 24V Power Distribution Module for DJI Ronin 2 to the camera's power input, so the ALEXA 35 on the gimbal runs off the Ronin 2 batteries. It is the replacement for the cable included in the module kit.

The Tilta TCB-4LEM-8LEF is the last link in powering an ARRI ALEXA 35 on the DJI Ronin 2: gimbal → 24 V distribution module → this cable → camera. The coiled cable stretches as the gimbal tilts and coils back up, so it never hangs or snags.

4-pin from the module, 8-pin into the ALEXA 35

The 4-pin plug goes into the 24 V output of the Tilta 24V Power Distribution Module for DJI Ronin 2, the 8-pin socket at the other end takes the power connector of the ARRI ALEXA 35. Both connectors have push-pull locking, so the cable will not pull out as the gimbal moves. The cable is built for the 24 V the camera needs to run and which the module distributes from the Ronin 2 — for high-voltage camera systems and their accessories.

Coiled, replacement part of the kit

The coiled design stretches only as far as needed at the moment and coils up at rest — on a gimbal, where the camera tilts and pans, no loose loop forms. The connectors are stainless steel, the conductors copper, the colour black. The cable is part of the 24V Power Distribution Module kit; on its own it is bought as a replacement or a spare. From the Ronin 2 to the module runs the TCB-R4LEM-4LEF-30 cable.

Tilta cables

The Tilta TCB cable range links camera, battery and accessories on the rig: power from a V-Mount or Gold Mount plate over P-Tap, 2-pin Lemo, 3-pin Fischer or a DC barrel connector, USB-C PD for monitors and handles, 7-pin control cables for the Nucleus system and HDMI or BNC for the picture. Lengths follow the rig — short on the cage, longer out to arms and batteries; this cable is one of them.

• Coiled power cable 4-pin plug to 8-pin socket — 1×

• Connectors: 4-pin plug – 8-pin socket
• Voltage: 24 V
• Type: coiled cable
• Material: stainless steel, copper
• Colour: black
• Compatibility: ARRI ALEXA 35 (8-pin power input, 24 V) and Tilta 24V Power Distribution Module for DJI Ronin 2 (TGA-PDM-RN2); replacement for the cable included in the module kit