Tilta Boulder Camera Cart (Aluminum) - Gray Tilta

Podrobný popis

The Tilta Boulder Camera Cart is an aluminum camera cart that assembles without tools and, after the shoot, folds into a case with its own wheels — it fits in a station wagon. It carries 400 kg, rolls on 9" pneumatic tires and, thanks to 1/4"-20 and 3/8"-16 threads, 40mm speed rails and NATO/Manfrotto crossbars, becomes a focus-pulling station, DIT desk, streaming studio or workshop. Gray finish, base model without accessories.

The Tilta Boulder Camera Cart is a rugged, portable cart for filmmakers, technicians and DIY enthusiasts. It goes up in minutes without a single tool, and when the shoot is over the top and bottom trays lock together into a hard-shell case with a handle and its own wheels. The base model has two fixed and two swivel casters with 9" pneumatic tires and a pair of handles; the aluminum trays carry 1/4"-20 and 3/8"-16 threads with locating points, so the cart expands with optional accessories to fit exactly the way you work.

Mobile basecamp on set

On set the cart works as a mobile basecamp for the whole crew — the focus puller has the monitor, the DIT the laptop and the technician the tools in one place. Crossbar height adjusts to wherever you want the monitor, and because the crossbars follow the NATO and Manfrotto standards, common monitor, wireless receiver and light mounts attach directly without extra adapters.

Live streaming ready

For live streaming or interview shoots use the large top tray, the middle tray for switching gear and the VESA monitor mount. Camera, receivers, mixer and light sit on one cart that moves to another spot in the studio in seconds — with the whole station and without unplugging a cable.

Expandable workspace

The top tray follows the IGT standard: with both optional IGT modules it expands to up to 1.7 m of workspace, enough for a focus monitor and a laptop side by side. A middle tray hangs underneath for extra storage, and the VESA monitor mount (75/100 mm) clamps to the 40mm speed rail with smooth adjustment and 90° rotation.

400 kg payload on 9" pneumatic tires

The cart carries 400 kg in total, 90 kg of it on the top tray — a complete camera package, batteries, a lens case and two monitors at once. The 9-inch pneumatic tires absorb paving, gravel and lawn, so the gear rolls smoothly beyond the flat studio floor. An air pump is included.

Tool-free assembly, folds into a case

Posts, crossbars, handles and wheels slot in without any tools: the cart assembles and breaks down in minutes. Folded, it takes a fifth of its size — the top and bottom trays lock together into a closed 922 × 612 × 180 mm case with a handle and its own wheels that fits in the trunk of most cars.

Desktop and studio use

In the office, studio or home workshop the cart becomes a mobile workbench. The optional pegboard with straps and hooks (16 and 32 mm) keeps tools, cables and small gear visible and within reach, the monitor hangs from the sliding mount above the tray, and when you need the space, the cart rolls aside with everything on it.

40mm speed rail and sliding monitor mount

The vertical posts are 40mm speed rails with height markings, so the crossbar sits at exactly the same height on both sides. The monitor mount slides left and right along the crossbar and rotates so the picture faces wherever you stand. Uniform standards across the cart — 1/4"-20, 3/8"-16, 40 mm, NATO and Manfrotto — mean third-party accessories fit without adapters.

Built for the outdoors

Thanks to the modular IGT system the cart adapts to the outdoors — camping, shoots in the field or working next to a vehicle. Lightweight baby pin stands hold work lights, hooks on the speed rails carry LED lamps and small accessories, and the tray is where the coffee gets brewed or the melon sliced. An optional umbrella (coming soon from the manufacturer) shields the station from sun and rain.

Attention to detail

Magnetic fold-down side

The side wall of the top tray folds down and is held by a magnet — the tray becomes a flat table and a monitor or keyboard reaches the edge.

Universal standards

1/4"-20 and 3/8"-16 threads, 40mm speed rail, NATO rail and Manfrotto — every accessory fits without an adapter.

Speed rail with height markings

The posts carry a scale, so the crossbar sets to the same height on both sides without measuring.

One-step-release brake

Swivel casters lock and release with a single step — the cart stays put on a slope and fully loaded.

Base model and Indie Kit

This product is the base model — the cart without accessories. The Indie Kit (TC-T01-A-G) adds a Steadicam dock, a monitor mount for the crossbar, an expansion mounting bracket kit, the IGT outdoor expansion module and a dual IGT plate kit. Both versions are in the variant selector below the price.

Optional accessories — lockable top drawer, tripod holder, 75/100 mm fluid head ball mount, middle tray, support leg, cable hooks, organizer bin, pegboard or baby pin stands — are listed under accessories below. The manufacturer's manual is available for download.

• Boulder top tray, gray — 1×
• Boulder bottom tray, gray — 1×
• Support post 40 mm (speed rail), gray — 4×
• Crossbar, gray — 2×
• Fixed caster 9", gray — 2×
• Swivel caster 9" with brake, gray — 2×
• Handle — 1 set (2 pcs)
• Air pump — 1×

• Materials: aluminum alloy, iron, stainless steel, plastic
• Color: gray
• Expanded dimensions: 1078 × 612 × 1045 mm (with handles)
• Collapsed dimensions: 922 × 612 × 180 mm
• Load capacity: 400 kg total, 90 kg top tray
• Wheels: 9" pneumatic tires, 2× fixed + 2× swivel with brake
• Post diameter: 40 mm speed rail
• Mounting standards: 1/4"-20, 3/8"-16, 40 mm, NATO, Manfrotto, IGT
• Weight: 46.4 kg
• Shipping box: 1070 × 780 × 410 mm, 74.3 kg