Tilta Hot Shoe Top Plate for Sony FX3/FX30 V2 - Black Tilta

Podrobný popis

The Tilta TA-T16-HSTP-B is a compact top plate for the Tilta cage on the Sony FX3/FX30 V2 that leaves the camera hot shoe clear — a Sony ECM-W3 microphone stays on the body even with the cage on. It offers a NATO rail and 1/4"-20 and 3/8"-16 threads with ARRI locating points; the rail is detachable. It screws to the cage with two 1/4"-20 screws at a 25 mm pitch. Aluminium alloy and stainless steel, black.

The Tilta TA-T16-HSTP-B is the alternative to the full top plate of the cage for the Sony FX3/FX30 V2 for anyone who needs the camera hot shoe — the shorter plate sits beside the shoe rather than over it, while the mounting points for the top handle and accessories remain.

Mounting points for a handle and accessories

The plate carries a NATO rail for the Tilta quick-release top handle plus 1/4"-20 and 3/8"-16 threads with ARRI locating points, so an accessory cannot twist. A 3/8"-16 to 1/4"-20 threaded adapter is included: a handle or bracket with either screw mounts without further parts. The plate is aluminium alloy, light and without unnecessary bulk above the camera.

Detachable NATO rail and clear hot shoe

The plate is shortened so it does not cover the hot shoe on the FX3/FX30 body — the Sony ECM-W3 wireless microphone or any other shoe-mounted accessory stays on the camera with the cage fitted. When the NATO rail is not needed, it unscrews: the rig sits lower and the 1/4"-20 threads in the plate remain available.

Mounting with two 1/4"-20 screws

The plate attaches to the Tilta cage for the Sony FX3/FX30 V2 with two 1/4"-20 screws at a 25 mm pitch, so it does not rotate on the cage and also fits other accessories with the same pitch. The hex key for tightening is in the box. The plate is intended for the V2 cage (TA-T16-FCC) and the kits that include it.

The Tilta cage system

A Tilta cage is only the start: every series has parts designed for the camera body — top handles, side handles with a REC button, HDMI and USB-C cable clamps, battery plates, 15 mm rod holders, lens adapters and ARCA or NATO interfaces. The parts share 1/4"-20 and 3/8"-16 threads with locating pins, NATO rails and cold shoes, so they combine across series. This part is one of them.

• Hot shoe top plate for Sony FX3/FX30 V2 — 1×
• Hex key — 1×

• Interface: NATO rail on top (detachable), 1/4"-20 and 3/8"-16 threads with ARRI locating points, 3/8"-16 to 1/4"-20 threaded adapter; two 1/4"-20 screws at 25 mm pitch underneath
• Material: aluminium alloy, stainless steel
• Colour: black
• Compatibility: Tilta cage for Sony FX3/FX30 V2 (TA-T16-FCC-B, TA-T16-FCC-TG and the Basic, Lightweight and Pro kits); leaves the hot shoe clear for the Sony ECM-W3 microphone