Tilta Lightweight Dual Handle Gimbal Support System Tilta

Podrobný popis

The Tilta Lightweight Dual Handle Gimbal Support System is the support vest plus a dual handle for the DJI RS 2, RSC 2, RS 3 and RS 3 Pro gimbals. The vest moves the weight into the hips, the rotating handles add two solid points of contact, and with the support straps the whole rig stays put even hands-free. The handles carry 1/4"-20 threads and a cold shoe for a monitor. The manufacturer states a 10 kg payload.

The vest alone carries the gimbal, but the shot is still steered from the wrist. The dual handle changes that: both hands have something to hold and the rig rests on more points at once.

Dual handles for both hands

The brackets clamp onto the gimbal’s NATO rails and carry two rotating handles. Turning them fine-tunes the angle of the wrist, so even a low grip stays comfortable for a long take. The brackets carry 1/4"-20 threads and a cold shoe for a monitor or microphone; a safety pin and a release pin keep the rig from coming apart.

The waist belt carries the weight, not your arms

The weight of the gimbal travels through the waist belt into the hips, so the hands only steer the shot. The belt has a quick release buckle adjustable at both ends and fits waists from 85 to 130 cm. The inside is breathable mesh with 10 mm EVA and 10 mm dense foam padding, which spreads the pressure and keeps the back cooler.

Shoulder straps and expansion points

The shoulder straps move part of the load from the hips onto the shoulders and can be unclipped when the belt alone is enough. On the belt sit a D-ring, an expansion strap for a small tripod or tools, and a safety button that stops the vest from slipping while you move.

Three ways to seat the gimbal

An adapter that holds the gimbal slides into the waist belt. The battery handle adapter takes the DJI RS 2 or RS 3 battery grip and leaves room for charging the battery; the extended grip tripod adapter holds legs of 34 to 37 mm. The whole holder sits on a NATO rail, so the height is fine-tuned without tools.

More points of contact, a calmer image

The vest, the straps and the handles hold the gimbal in several places at once. That damps the tremor from the hands and, above all, lets you shoot considerably longer than when the arms carry all the weight. The system is built for the DJI RS 2, RSC 2, RS 3 and RS 3 Pro gimbals and the manufacturer states a 10 kg payload.

What to watch out for

The handle brackets are made for the DJI Ronin gimbals listed above — the manufacturer does not guarantee them on other bodies. Letting go of the rig and leaving it hanging on the vest is done at your own discretion; the manufacturer states this explicitly. Check before every shoot that the safety pin is engaged.

• 1× Dual Handle Bracket for DJI Ronin — left
• 1× Dual Handle Bracket for DJI Ronin — right
• 1× Waist Vest for the Gimbal Support Vest
• 1× Shoulder Support straps
• 1× NATO to 1/4"-20 mounting bracket for the Gimbal Support Vest
• 1× battery handle adapter for the gimbal
• 1× extended grip tripod adapter
• 1× 1/4"-20 strap ring
• 2× travel bag for the Dual Handle Bracket

• Type: support vest with dual handles for handheld gimbals
• Dimensions: vest 262 × 242 × 142 mm, dual handle 204 × 56 × 64 mm
• Payload: 10 kg (manufacturer’s figure)
• Waist range: 85–130 cm
• Mounting: NATO rail in the waist belt, 1/4"-20 thread, cold shoe
• Materials: aluminium, 1000D Cordura, mesh
• Padding: 10 mm EVA + 10 mm dense foam
• Compatibility: DJI RS 2, RSC 2, RS 3 and RS 3 Pro gimbals
• Colour: black