Tilta Side Handle Run/Stop Cable for 2.5mm LANC Port Tilta

Podrobný popis

The Tilta RS-TA-LANC is a run/stop cable for the Side Handle: one end sits in the handle, the other in the camera port, and the REC button on the handle starts and stops recording. This variant is made for cameras with a LANC port (2.5 mm jack). The cable carries only the run/stop command, no power and no video.

The Tilta RS-TA-LANC links the handle to the camera so that recording is started and stopped with a thumb from the handle, without reaching for the camera body. The handle is shared across the range; the cable is chosen by the camera port.

Run/stop from the handle for cameras with a LANC port (2.5 mm jack)

One end of the cable plugs into the Side Handle (7-pin connector), the other into the camera (LANC, 2.5 mm jack). From then on the REC button on the handle starts and stops recording, and the operator neither lets go of the grip nor hunts for the button on the camera body. The cable carries a single signal — run/stop; it transmits no power, video or data. For another camera only the cable changes, the handle stays.

Tilta run/stop cables

A run/stop cable carries a single signal: start and stop recording. One end sits in a Tilta handle with a REC button or in the Nucleus focus system, the other in the camera port that accepts remote triggering — LANC, RED SYNC or CTRL, mini-USB on Canon DSLRs, Sony Multi, Hirose, Fischer or ARRI EXT. The cable is chosen by the handle × camera pair; this is one of the range.

• Tilta RS-TA-LANC run/stop cable (7-pin connector → LANC, 2.5 mm jack) — 1×

• Handle side: Tilta Side Handle (Side Power Handle), 7-pin connector
• Camera side: LANC, 2.5 mm jack
• Function: start and stop recording (run/stop) with the button on the handle
• Colour: black
• Compatibility: Tilta Side Power Handles with run/stop button (Type I–III, F970 and F570); cameras with a LANC port (2.5 mm jack) — e.g. Sony FS5, FS7, FX6 and FX9, Blackmagic BMCC, URSA, URSA Mini and URSA Mini Pro, Panasonic EVA1 and BGH1, Z CAM