Tilta Variable ND Filter for DJI Osmo Pocket 3/4 (ND2-ND32) Tilta

Podrobný popis

A Tilta variable ND filter with stepless adjustment from ND2 to ND32 — one to five stops with a turn of the ring. The filter mounts magnetically — hold it close and it stays put; pinch the grooved edges to take it off. It is thin enough not to block lens retraction or gimbal calibration. The optical glass is coated on both sides against water, oil and scratches. Fits both the DJI Osmo Pocket 3 and the Osmo Pocket 4.

From ND2 to ND32 with one ring

The ring runs smoothly from ND2 to ND32, that is from one to five stops. On a single trip you can handle shade under the trees and a beach at noon without ever taking the filter off. The frame carries a 1 to 5 scale, so you can go straight back to the setting that worked.

Magnetic mount

The filter attaches to the Osmo Pocket lens magnetically. Just hold it close, it snaps into the right position and stays there. No threading, no adapter — swapping filters takes a couple of seconds even in the field, with gloves on or on the move.

Off with two fingers

The filter frame has finger grooves along the top and bottom edge. You pinch it off with two fingers without touching the glass — no need to put the camera down or switch it off.

No interference with lens retraction

The filter is thin enough not to interfere with lens retraction or gimbal calibration. You can fold the camera up and put it away with the filter on; next time you switch it on, it levels itself as if nothing were fitted.

Optical glass, coated on both sides

The glass is optical grade, ground to keep the image sharp and the colours true. A double-sided coating repels water and oil and protects against scratches, so the filter doubles as lens protection.

For Osmo Pocket 3 and Osmo Pocket 4

Tilta makes this filter line for both the DJI Osmo Pocket 3 and the DJI Osmo Pocket 4 — the two cameras share the same mount, so the filter fits either. It does not fit the older Osmo Pocket or the Pocket 2.

• Tilta Variable ND Filter for Osmo Pocket 3/4 (ND2-ND32) (TF-OP3-VND) – 1×

• Compatibility: DJI Osmo Pocket 3, DJI Osmo Pocket 4
• Mounting: magnetic
• Filter type: Variable ND
• Range: ND2–ND32
• Stops: 1–5
• Material: optical glass