Ulanzi HD02 10-inch Magic Arm Kit Ulanzi
Kód: AT098XPodrobný popis
The Ulanzi HD02 10-inch Magic Arm Kit T098 is a universal arm for cameras and camcorders. With a length of 10 inches, it offers flexible positioning of your devices. Ideal for stable mounting of monitors, lights, microphones, and other accessories. The robust construction ensures reliability when filming and photographing. Improve your production with this high-quality magic arm set from Ulanzi.
Magic arm with a crab clamp
A two-section aluminium arm, 25.4 cm long, carrying up to 3 kg. The included clamp fixes it to a table, pipe or tripod, and the ball heads at both ends set a monitor, light or microphone to the right angle.
Accessories exactly where you need them
Three articulation points and 360° rotation between the two sections let you place a monitor, light or microphone in any position. Once tightened, the arm holds firmly.
Monitor
Set the display to a comfortable angle.
Light and microphone
The 1/4"-20 thread takes small lights and mics.
Desk setup
The clamp attaches to the edge of a tabletop.
On a tripod
The arm adds another mount to a tripod leg.
360° ball heads on both ends
Each end of the arm has a ball head rotating 360°, and there is another 360° rotating joint between the two sections. Loosen the knobs to fine-tune the angle and tighten them to lock it.
Clamp for thicknesses of 22–87 mm
The included crab clamp fits a tabletop, shelf or pipe within a range of 22–87 mm. Non-slip pads protect the surface and hold firmly.
1/4"-20 and 3/8"-16 threads with ARRI pins
The arm offers a 1/4"-20 screw with ARRI locating pins and 1/4"-20 and 3/8"-16 threaded holes. Mount cameras, lights and other accessories on them.
Arm on a tripod
You can also clamp it to a tripod leg. The arm then serves as another adjustable mount for a light or monitor without needing a second stand.
Monitor at a comfortable angle
The arm puts a camera monitor where you see it best, and the 3 kg load capacity suits most monitors and small lights.
Up to 3 kg load capacity
The arm is made of aluminium alloy and stainless steel and holds up to 3 kg. Anti-slip pads, a 1/4″ screw and anti-rotation locking keep it stable.
Take it apart and carry it
The arm and the clamp detach from each other, so the kit fits into a small pouch and still gives strong support when needed.
More information
Magic arm with a crab clamp
The Ulanzi HD02 is a magic arm with a crab clamp for photo and video accessories. Mount cameras, lights or other accessories using the 1/4"-20 screw with ARRI locating pins or the 1/4"-20 and 3/8"-16 threaded holes. Attach the arm to surfaces 22 to 87 mm thick using the included clamp with non-slip pads. Once mounted, the angle is easy to adjust thanks to the 360° ball head at each end and the 360° rotation between the two arm sections. Photos are for illustration.
- 1× Ulanzi HD02 magic arm (25.4 cm)
- 1× crab clamp
- Brand: Ulanzi
- Model: HD02 Magic Arm Kit (T098)
- Load capacity: 3 kg
- Connections: 1× 1/4"-20 male, 1× 1/4"-20 female, 1× 3/8"-16 female
- Length: 25.4 cm
- Clamp width: 22–87 mm
- Number of sections: 2
- Points of articulation: 3
- Material: aluminium
Dodatočné parametre
| Kategória: | Adaptéry pre hlavy |
|---|---|
| Záruka: | 2 roky |
| EAN: | 6975357305792 |
| Položka bola vypredaná… | |
Diskusia
Buďte prvý, kto napíše príspevok k tejto položke.
Len registrovaní používatelia môžu pridávať príspevky. Prosím prihláste sa alebo sa zaregistrujte.
