Exascend Archon CFast2.0, 1TB Exascend

Podrobný popis

The Archon CFast 2.0 memory card was developed jointly by Exascend and RED Digital Cinema and is certified for the RED KOMODO 6K. It reads at up to 560 MB/s and writes at a sustained 500 MB/s, so R3D recording runs without dropped frames. 1 TB capacity, 600 TB write endurance (TBW), protection against water, dust, impact, X-rays and magnetic fields. Five-year warranty with factory data recovery included.

CFast 2.0 with RED certification for the KOMODO

Archon was developed together with RED Digital Cinema and passed RED’s certification programme for the KOMODO 6K. 560 MB/s read, a sustained 500 MB/s write, and a five-year warranty with data recovery included.

RED APPROVED560 / 500 MB/s1 TB600 TB TBW5-YEAR WARRANTY

Developed for the RED KOMODO

RED put the Archon through its own certification programme and the card earned the RED Approved rating. In the KOMODO 6K it holds a sustained 500 MB/s write, so the camera never drops a frame even on long R3D takes.

Shooting without overheating or dropouts

Adaptive Thermal Control stops the card slowing down as it warms up, SuperCruise™ keeps the write speed stable and RAID ECC can rebuild even severely corrupted data. Industrial-grade hardware and firmware are built for shooting in the field.

Five-year warranty and data recovery

Exascend backs the card with a five-year warranty and a factory data recovery service — if footage is deleted by mistake or the card gets formatted, the manufacturer will try to get it back. 600 TB write endurance and an MTBF of 2,000,000 hours match the industrial storage the Archon is derived from.

Rugged in the field

Waterproof, dust-resistant, impact-resistant, X-ray-safe and magnet-resistant. Operates from −5 to 70 °C and can be stored from −40 to 85 °C.

SATA III 6 Gb/s

Standard CFast 2.0 interface — the card fits any camera or reader with a CFast 2.0 slot. The RED certification applies to the KOMODO 6K.

3D TLC NAND

3D TLC memory with Data Retention Plus™, which refreshes stored data before the natural degradation of flash memory can put it at risk.

Afterburner™ and Smartstream™

Maximum performance during fast action and a balanced ratio of performance to power draw during long recordings.

512 GB or 1 TB

The Archon CFast comes in two capacities; this is the 1 TB version with 600 TB write endurance.

The 1TB Archon CFast 2.0 Memory Card from Exascend is compatible with RED, including RED Komodo, as well as Blackmagic Design, ZCam, Canon C200, Canon C300, and other devices that are compatible with the CFast 2.0 standard, which utilizes the SATA III 6 Gb/s interface. It can handle raw video and features maximum read speeds of up to 560 MB/s, maximum write speeds of up to 500 MB/s, and minimum write speeds of up to 450 MB/s.

• 1× Exascend Archon CFast 2.0 1 TB memory card

• Card type: CFast 2.0
• Capacity: 1 TB
• Interface: SATA III, 6 Gb/s
• Memory type: 3D TLC NAND
• Max. sequential read: 560 MB/s
• Max. sequential write: 500 MB/s
• Sustained read / write: 560 / 500 MB/s
• Input voltage: 3.3 V ±5 %
• Operating temperature: −5 to 70 °C
• Storage temperature: −40 to 85 °C
• Endurance (TBW): 600 TB
• MTBF: 2,000,000 hours
• Protection: water, dust, impact, X-ray, magnetic fields
• Certification: RED Approved — RED KOMODO 6K
• Warranty: 5 years, data recovery included
• Part number: EXSC3X001TB