Neutrik NC5MD-L-1 5-pole male XLR panel connector Neutrik

Podrobný popis

Neutrik five-pole XLR panel connector, male. Nickel-plated D-size metal housing, silver-plated contacts, and solder cups for wires up to 1.0 mm². Mounts into a standardized 24 mm D-size cutout.

The NC5MD-L-1 is part of Neutrik’s versatile line of D-size metal-body panel-mount XLR connectors. The five-pin version is used where the standard three-conductor configuration is insufficient—for DMX lines, stereo connections, intercoms, or powered microphones.

The connector is a male version, i.e., with pins. The conductors are soldered into the sockets, and the mating connector is secured by a latch. The body is made of die-cast zinc with a nickel finish, and the contacts are silver-plated.

The panel cutout is a standardized 24 mm D-size, so the connector can replace any other panel-mounted XLR of the same format. The design is UL-listed and complies with the IEC 61076-2-103 standard.

• 1× Neutrik NC5MD-L-1 panel connector

• Type: panel-mount XLR connector, male
• Number of poles: 5
• Wire connection: solder cups
• Conductor cross-section: max. 1.0 mm² (18 AWG)
• Panel cutout: standardized D-size 24 mm
• Lock: latch lock
• Rated voltage: < 50 V
• Rated current per contact: 7.5 A
• Contact resistance: ≤ 5 mΩ
• Capacitance between contacts: ≤ 7 pF
• Dielectric strength: 1.5 kV DC
• Insulation resistance: > 10 GΩ (typical)
• Insertion and extraction force: ≤ 20 N
• Number of operations: > 1,000 cycles
• Protection rating: IP 40
• Operating temperature range: −30 °C to +80 °C
• Contact surface: 2 µm Ag on 2 µm Ni
• Contact material: brass (CuZn39Pb3)
• Body material: zinc die-cast (ZnAl4Cu1), nickel-plated
• Insert material: polyamide PA66
• Latch material: Ck67 steel
• Flammability: UL 94 V-0
• Standard: IEC 61076-2-103
• Manufacturer's catalog number: NC5MD-L-1