SmallRig Wrist Support for DJI RS Series 4248 SmallRig
Kód: A4248XPodrobný popis
A wrist support for the DJI RS 2, RS 3 and RS 3 Pro. One 1/4"-20 screw fixes it under the gimbal, a silicone pad takes the load off your hand and a thumbwheel sets the height without tools. It has 1/4"-20 and 3/8"-16 threads and two QD sockets.
Wrist support for DJI RS gimbals
A wrist support for the DJI RS 2, RS 3 and RS 3 Pro.
Height without tools
The silicone pad relieves the hand, and a rotating crank sets the height for different wrist sizes. It screws on from below.
RS 3, RS 3 Pro, RS 2
Not for the RS 3 mini and RS C2.
One wrist
Intended for the right wrist only.
1/4"-20 screw
One screw from below; make sure it is tight.
Threads and QD
1/4"-20 and 3/8"-16 threads, two QD sockets for a strap.
1. Compatible with DJI RS 3 / RS 3 Pro / RS 2, installed on the bottom of the stabilizer via 1/4"-20 screws.
2. Ergonomic silicone support pad facilitates gimbal shooting.
3. The rotating crankset helps adjust the height as needed; suitable for wrists of different sizes.
Note:
1. Please ensure the 1/4”-20 screw is tightened.
2. Incompatible with RS 3 mini / RS C2.
3. Only for the right wrist.
Compatible With
DJI RS 3, DJI RS 3 Pro, DJI RS 2
1× Hex Spanner
Package Dimensions: 145 × 104 × 57 mm / 5.7 × 4.1 × 2.2in
Product Weight: 233±5.0 g / 8.21±0.2oz
Package Weight: 283±5.0 g / 9.98±0.2oz
Material(s): Aluminum Alloy, Stainless Steel, Silicone
Dodatočné parametre
| Kategória: | SmallRig pre DJI stabilizátory |
|---|---|
| Záruka: | 2 roky |
| EAN: | 6941590014555 |
Diskusia
Buďte prvý, kto napíše príspevok k tejto položke.
Len registrovaní používatelia môžu pridávať príspevky. Prosím prihláste sa alebo sa zaregistrujte.
